Latest Research in Computational Machining Optimization

Top Research Topics in Computational Machining Optimization

• Advanced machining processes and optimization — 25 papers
• Additive Manufacturing Materials and Processes — 12 papers
• Erosion and Abrasive Machining — 7 papers
• Metallurgy and Material Forming — 5 papers
• Surface Treatment and Residual Stress — 5 papers
• Welding Techniques and Residual Stresses — 4 papers
• Fatigue and fracture mechanics — 4 papers
• Advanced Machining and Optimization Techniques — 3 papers
• Fire effects on concrete materials — 3 papers
• Metal Forming Simulation Techniques — 3 papers

Highest-Cited Papers

1. Towards analysis-aware geometry defeaturing for inception voltage predictions
2. Analysis and optimization of advance gas metal arc welding process parameters for controlled dilution using computational models
3. Material parameters for the VGM and SMCS model of ADC12 cast aluminium alloy: Calibration and verification
4. Formation and process-based adjustment of residual stresses in cold cup forward extrusion
5. Decoupling the effects of internal stresses from heat treatment and machining induced residual stresses, on distortions of Inconel 718 turned parts
6. Ensemble Prediction Framework for Abrasive Aqua-Jet Cutting of TiAFL with RSM Integration
7. Improved EDM Precision with Advanced Ensemble Machine Learning Prediction for INC-625 Superalloy
8. Unlocking chemistry behind the metal arc welding-based parametric optimization to enhance the weld efficiency and tensile strength in AISI 1006 steel by using the spice logic analytical hierarchy-based multi criteria decision-making approach
9. Surface Topographical Analysis of Diametric and Kerf Behavior in Micro-Hole Piercing on Inconel 718 using AWJM
10. Research on the Surface Quality of Momentum‐Flow Twin‐Roll Strip Casting Strip Based on Numerical Simulation
11. Surface Roughness Estimation from Internal Spindle Torque During Side Milling of Invar 36
12. Response-Specific Surrogate Selection for Particle Swarm Optimization of End-Milling Parameters in AISI 1045 Steel
13. Cooling effects on post-fire tensile properties of S235 and S355 steels
14. Performance of an aminolyzed castor oil emulsion as a cutting fluid in the MQL turning of ASTM A182 F55 super duplex stainless steel
15. Association between extrusion process stability and dimensional accuracy of aluminum profiles
16. Performance evaluation of coated carbide tools and machinability investigation of AISI D7 cold work tool steel in turning under dry environment
17. A machine learning prediction–optimisation framework for dry turning of grey cast iron to enhance machinability and prolong tool life: A comparative study of hybrid DNN, SVM and decision tree
18. Effect of Material Property Factors on the Interfacial Residual Stress Gradient in High-Manganese Steel/STS304 Dissimilar Butt Welds
19. Nonlinear Modeling of Surface Roughness in Turning of Nitinol: Influence of Cutting Forces, Temperature, and Negative Rake Angle Tools
20. Extending high value components performances with Additive Manufacturing: application to naval applications

Sub-Regions

• Additive Manufacturing Materials and Processes — 29 papers
• Advanced machining processes and optimization — 26 papers
• Aluminum Alloy Microstructure Properties — 16 papers
• Surface Treatment and Residual Stress — 13 papers
• Advanced Machining and Optimization Techniques — 12 papers
• Metallurgy and Material Forming — 11 papers