A Novel Hybrid Gripper for Endovascular Interventions Using Collaborative Robotic Arms
BACKGROUND: Current robotic systems for endovascular interventions automate intravascular navigation. However, tool preparation, assembly, and exchange are still performed manually, which limits procedural automation. METHODS: To address these challenges, we propose a hybrid gripper that combines a rigid gripping section for manipulating proximal tool ends with a hydraulic gripping mechanism for grasping, moving, and rotating guidewires and catheters with diameters from 0.25 to 3 mm. RESULTS: The hydraulic gripping mechanism generated friction forces comparable to or greater than manual manipulation for all tested tools. The balloon withstood at least 307 inflation-deflation cycles (approximately 1.6 times the number required for a typical intervention). A dual-arm collaborative robot successfully assembled endovascular tool configurations and navigated catheters and guidewires through multiple vascular bifurcations in a thoracic aorta simulator. CONCLUSIONS: The proposed hybrid gripper enables both robotic tool preparation and intravascular manipulation using a single end-effector, expanding the scope of robotic automation in endovascular interventions.
Authors
- Alexey M. Romanov (ORCID: https://orcid.org/0000-0003-1838-0489)
- Natalia M. Alekseeva (ORCID: https://orcid.org/0009-0002-7099-8163)
- Alexander G. Viller
Institutions
- MIREA - Russian Technological University (RU)
- Institute of Biomedical Chemistry (RU)
Publication Details
- Journal
- International Journal of Medical Robotics and Computer Assisted Surgery
- Published
- 2026-11-20
- DOI
- https://doi.org/10.1002/rcs.70253
- Primary Topic
- Soft Robotics and Applications
- Type
- article
- Field-Weighted Citation Impact
- 0.00