Characterization of Fe-Cu alloy parts produced by additive manufacturing based selective powder deposition technique
Selective Powder Deposition (SPD) is an emerging metal additive manufacturing (AM) technique that offers a potentially cost-effective route for fabricating metal/alloy or ceramic matrix composite parts. The SPD process facilitates near-net-shape fabrication of metallic components, eliminating the need for dedicated metallic tooling inherent to conventional powder metallurgy. This study investigates the fabrication of an Fe–Cu alloy via in situ copper infiltration of selectively deposited iron powder using SPD. The process comprises layer-by-layer powder deposition without a laser or binder, followed by sintering and post-processing. A full-factorial experimental design was employed to investigate the effects of three process parameters—sintering temperature, heating rate, and sintering time—each evaluated at three levels, on the properties of the fabricated components. Subsequent characterization of the specimens revealed a maximum microhardness of 156 HV, an ultimate compressive strength of 613 MPa, and a minimum wear rate of 0.08 µm/s. These findings demonstrate the feasibility of SPD with in situ copper infiltration to produce Fe–Cu alloy components and elucidate the critical role of sintering conditions in tailoring their mechanical performance.
Authors
- Harshit K. Dave (ORCID: https://orcid.org/0000-0003-0970-4373)
- Savan D. Fefar (ORCID: https://orcid.org/0000-0002-9977-0296)
Institutions
- Sardar Vallabhbhai National Institute of Technology Surat (IN)
Publication Details
- Journal
- Next Materials
- Published
- 2026-11-21
- DOI
- https://doi.org/10.1016/j.nxmate.2026.104036
- Primary Topic
- Additive Manufacturing Materials and Processes
- Type
- article
- Field-Weighted Citation Impact
- 0.00