ENERGY ANALYSIS OF INDUSTRIAL COOLING, AIR-CONDITIONING AND HEAT PUMP SYSTEMS
Cooling, air-conditioning and heat pump systems are among the largest and fastest-growing electricity consumers in industry and buildings, yet their energy performance is rarely examined beyond nameplate efficiency. This article presents an energy analysis framework for such systems that combines first-law indicators (COP, EER, SEER) with a second-law comparison against the Carnot limit. It draws on recent international reports and technical guides, including the IEA analyses of cooling and heat pumps, an industrial refrigeration guide based on field data, a review of high-temperature heat pumps and the IEA review of Uzbekistan's energy sector. The review shows that air conditioners alone use about a fifth of the electricity in buildings worldwide and that field-tested control measures can cut industrial refrigeration energy by up to 50% on unoptimised plants. Illustrative calculations show that every 10 K of additional temperature lift raises the electricity needed for the same heat output by roughly 25–50% at the assumed second-law efficiency, which explains why heat source selection and condensing temperature control dominate savings. The article ends with a practical audit sequence for engineers working in energy-intensive economies such as Uzbekistan.
Authors
- Latipova M. I.
- Xoliddinov Ilxombek Xosiljonovich
- Sobirov Azamat Farxodjon o'g'li
- Latifjonov Ibratillo Xikmat o'g'li
Publication Details
- Journal
- Zenodo (CERN European Organization for Nuclear Research)
- Published
- 2026-11-21
- DOI
- https://doi.org/10.5281/zenodo.24411501
- Primary Topic
- Refrigeration and Air Conditioning Technologies
- Type
- article
- Field-Weighted Citation Impact
- 0.00