Investigate the effect of various cutting parameters on the surface roughness of aluminum alloy 5052 by using Taguchi method

The characteristic surface finish of machining is a key indicator of product quality and an indispensable customer requirement. Taguchi robust parameter design for optimizing surface finish in the turning of 5052 AL alloy using carbide cutting has been utilized in this paper. Using the Taguchi method for AA5052 aluminum alloy machining reveals that feed rate, cutting speed, and depth of cut significantly impact surface roughness, with feed rate often being the dominant factor, followed by speed, then depth. The results showed that lower feed rates (e.g., 0.1 mm/rev) and higher cutting speeds (e.g., 900 rpm) generally yield the best (lowest) surface roughness (Ra), while optimal depth of cut varies but often favors lower values. ANOVA and Signal-to-Noise (S/N) ratio analyses confirm parameter significance, allowing prediction of optimal settings for improved quality. Finally, we developed the relationship between cutting parameters and response using MINITAB-16 and performed regression analysis. The predicted values were compared with the experimental values, and it was observed that both values were very close; hence, the models prepared were more accurate and adequate.

Authors

Institutions

Publication Details

Journal
Al-Farooq Journal of Sciences
Published
2026-11-21
DOI
https://doi.org/10.65405/2yvdct20
Primary Topic
Advanced machining processes and optimization
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Investigate the effect of various cutting parameters on the surface roughness of aluminum alloy 5052 by using Taguchi method

Saleh A. Almajdup, Asmail Alfrjani Alshanta, Mohamed Etuhami Swei
Al-Farooq Journal of Sciences
Advanced machining processes and optimization
article

Investigate the effect of various cutting parameters on the surface roughness of aluminum alloy 5052 by using Taguchi method

Saleh A. Almajdup, Asmail Alfrjani Alshanta, Mohamed Etuhami Swei
article en

Abstract

The characteristic surface finish of machining is a key indicator of product quality and an indispensable customer requirement. Taguchi robust parameter design for optimizing surface finish in the turning of 5052 AL alloy using carbide cutting has been utilized in this paper. Using the Taguchi method for AA5052 aluminum alloy machining reveals that feed rate, cutting speed, and depth of cut significantly impact surface roughness, with feed rate often being the dominant factor, followed by speed, then depth. The results showed that lower feed rates (e.g., 0.1 mm/rev) and higher cutting speeds (e.g., 900 rpm) generally yield the best (lowest) surface roughness (Ra), while optimal depth of cut varies but often favors lower values. ANOVA and Signal-to-Noise (S/N) ratio analyses confirm parameter significance, allowing prediction of optimal settings for improved quality. Finally, we developed the relationship between cutting parameters and response using MINITAB-16 and performed regression analysis. The predicted values were compared with the experimental values, and it was observed that both values were very close; hence, the models prepared were more accurate and adequate.

Al-Farooq Journal of SciencesVol. 2(4)
Higher Institute of Engineering (EG)
Advanced machining processes and optimization
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon
Investigate the effect of various cutting parameters on the surface roughness of aluminum alloy 5052 by using Taguchi method — Saleh A. Almajdup, Asmail Alfrjani Alshanta, et al. · Al-Farooq Journal of Sciences (2026) | TGRS Research Map | TGRS