Rethinking compliant mechanism design via topology optimization: a mechanics-based analysis of similarity, boundary conditions, and operating-condition consistency
Topology optimization (TO) has been widely applied to compliant mechanism (CM) design, yet the mechanical implications of commonly adopted formulations have not been comprehensively interpreted. This study revisits CM topology optimization from a mechanics-based perspective, focusing on similarity, boundary-condition dependence, and operating-condition consistency. For small strain design, nondimensionalization and energy analysis are used to explain load-level invariance, spring-stiffness dependence, and the tendency toward grayscale and hinge-like regions under different input boundary conditions. The analysis shows that the output spring stiffness directly governs topology formation and should have a physically interpretable relationship to the actual workpiece or surrounding environment rather than serve as a numerical tuning parameter. For finite strain design, numerical examples demonstrate that artificial strains and excessive stiffening under small strain kinematics can degrade functional performance when large rotations occur. A gap-dependent output boundary is then examined as a simplified representation incorporating the target position and environmental stiffness associated with the intended operating conditions. The results show that, for CM designs involving large rotations and interaction with a target environment, finite strain kinematics and output modeling that reflects the intended operating conditions should be considered together. The principal contribution of this study lies not in introducing additional algorithmic complexity, but in establishing a formulation-level framework that connects topology formation and performance to the underlying kinematics, boundary conditions, and energy transfer. The findings further demonstrate that methodological novelty alone is insufficient when mechanical consistency and physical relevance remain unresolved.
Authors
- Jike Han (ORCID: https://orcid.org/0000-0002-7535-7202)
- Benliang Zhu (ORCID: https://orcid.org/0000-0002-2332-5532)
- Shinji Nishiwaki (ORCID: https://orcid.org/0000-0003-1263-7263)
- Zhaoyou Sun (ORCID: https://orcid.org/0009-0003-8079-8744)
Institutions
- Guangdong University of Technology (CN)
- Harbin Institute of Technology (CN)
- Kyoto University (JP)
- Kyoto University of Education (JP)
- Kyoto Katsura Hospital (JP)
Publication Details
- Journal
- Computational Mechanics
- Published
- 2026-11-21
- DOI
- https://doi.org/10.1007/s00466-026-02888-2
- Primary Topic
- Topology Optimization in Engineering
- Type
- article
- Field-Weighted Citation Impact
- 0.00