Full-scale spun-cast geopolymer concrete pipes: Structural performance and sulfuric acid resistance with protective coatings

The transition of geopolymer concrete from laboratory-scale specimens to full-scale industrially manufactured structural elements remains a major challenge to its widespread practical application for developing sustainable infrastructure. This study explores the structural performance and sulfuric acid resistance of full-scale geopolymer concrete pipes manufactured using a locally available centrifugal casting technique. A total of fifteen reinforced concrete pipes were fabricated in a commercial precast unit using traditional reinforced cement concrete (RCC), fly ash-based geopolymer concrete (GPC-F) and slag-based geopolymer concrete (GPC-S). A series of destructive and non-destructive tests were performed to evaluate the quality of the pipe walls, compressive strength of pipe mixtures, their transport properties and load-bearing performance of the full-scale pipes. To investigate their acid resistance, the pipes were sectioned into 300 mm wide rings, which were subsequently divided into four equal segments along the pipe circumference. The resulting pipe segments, either uncoated or protected with bitumen coating or a combined epoxy-bitumen coating system, were exposed to 1% and 5% sulfuric acid solutions for up to 90 days. The deterioration of the exposed segments was quantified through visual observations, evaluating mass changes and residual compressive and flexural strengths. Furthermore, microstructural analyses were performed on selected specimens to complement the experimental findings. The results demonstrated that cementless reinforced concrete pipes (GPC-F and GPC-S) exhibited D -load capacities comparable to those of cement concrete RCC pipes and satisfied the ASTM C76 Class III requirements. However, RCC pipe segments exposed to sulfuric acid solutions exhibited noticeable discoloration, surface cracking and severe deterioration at 90 days. The highest mass loss and flexural strength reduction, approximately 8% and 89%, respectively, were observed in uncoated RCC specimens at 90 days exposure to a 5% solution. In contrast, both GPC-F and GPC-S pipe segments demonstrated improved resistance to sulfuric acid attack. Similarly, segments coated with bitumen and epoxy materials exhibited significantly enhanced resistance to sulfuric acid exposure. Notably, the epoxy-coated GPC-S segments experienced less than 1% mass loss and only a 20% reduction in flexural strength after 90 days of exposure to the 5% sulfuric acid solution. Furthermore, the geopolymer mixtures (GPC-F and GPC-S) showed lower embodied energy requirements while maintaining comparable material costs. This study suggested that geopolymer concrete, combined with epoxy coatings, is a promising material for the production of full-scale pipes, offering a durable and sustainable solution for long-term infrastructure applications.

Authors

Institutions

Publication Details

Journal
Construction and Building Materials
Published
2026-11-21
DOI
https://doi.org/10.1016/j.conbuildmat.2026.148859
Primary Topic
Concrete and Cement Materials Research
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Full-scale spun-cast geopolymer concrete pipes: Structural performance and sulfuric acid resistance with protective coatings

Muhammad Abdullah Umer, Safeer Abbas, Faisal Amin, Moncef L. Nehdi et al.
Construction and Building Materials
Concrete and Cement Materials Research
article

Full-scale spun-cast geopolymer concrete pipes: Structural performance and sulfuric acid resistance with protective coatings

Muhammad Abdullah Umer, Safeer Abbas, Faisal Amin, Moncef L. Nehdi, Muhammad Haseeb Alvi, Rashid Hameed
article en

Abstract

The transition of geopolymer concrete from laboratory-scale specimens to full-scale industrially manufactured structural elements remains a major challenge to its widespread practical application for developing sustainable infrastructure. This study explores the structural performance and sulfuric acid resistance of full-scale geopolymer concrete pipes manufactured using a locally available centrifugal casting technique. A total of fifteen reinforced concrete pipes were fabricated in a commercial precast unit using traditional reinforced cement concrete (RCC), fly ash-based geopolymer concrete (GPC-F) and slag-based geopolymer concrete (GPC-S). A series of destructive and non-destructive tests were performed to evaluate the quality of the pipe walls, compressive strength of pipe mixtures, their transport properties and load-bearing performance of the full-scale pipes. To investigate their acid resistance, the pipes were sectioned into 300 mm wide rings, which were subsequently divided into four equal segments along the pipe circumference. The resulting pipe segments, either uncoated or protected with bitumen coating or a combined epoxy-bitumen coating system, were exposed to 1% and 5% sulfuric acid solutions for up to 90 days. The deterioration of the exposed segments was quantified through visual observations, evaluating mass changes and residual compressive and flexural strengths. Furthermore, microstructural analyses were performed on selected specimens to complement the experimental findings. The results demonstrated that cementless reinforced concrete pipes (GPC-F and GPC-S) exhibited D -load capacities comparable to those of cement concrete RCC pipes and satisfied the ASTM C76 Class III requirements. However, RCC pipe segments exposed to sulfuric acid solutions exhibited noticeable discoloration, surface cracking and severe deterioration at 90 days. The highest mass loss and flexural strength reduction, approximately 8% and 89%, respectively, were observed in uncoated RCC specimens at 90 days exposure to a 5% solution. In contrast, both GPC-F and GPC-S pipe segments demonstrated improved resistance to sulfuric acid attack. Similarly, segments coated with bitumen and epoxy materials exhibited significantly enhanced resistance to sulfuric acid exposure. Notably, the epoxy-coated GPC-S segments experienced less than 1% mass loss and only a 20% reduction in flexural strength after 90 days of exposure to the 5% sulfuric acid solution. Furthermore, the geopolymer mixtures (GPC-F and GPC-S) showed lower embodied energy requirements while maintaining comparable material costs. This study suggested that geopolymer concrete, combined with epoxy coatings, is a promising material for the production of full-scale pipes, offering a durable and sustainable solution for long-term infrastructure applications.

Construction and Building MaterialsVol. 551
University of Engineering and Technology Lahore (PK), University of Guelph (CA), University of Management and Technology (PK)
Concrete and Cement Materials Research
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon