Real-time smart waste monitoring using IoT technologies
In many developing regions, traditional waste management methods face persistent challenges, such as fixed collection schedules, overflowing bins, environmental pollution, and high operational costs. To address these issues, this study presents a smart waste management system (SWMS) that uses Internet of Things (IoT) technologies for real-time monitoring and data-driven decision support. The system integrates an ESP32 microcontroller, an ultrasonic sensor, a global system for mobile communications (GSM) module, and a custom Android application. Three prototype bins were evaluated through 150 sensing trials. The sensing subsystem achieved an overall mean absolute error (MAE) of 1.35 percentage points and a root mean square error (RMSE) of 2.12 percentage points. One GSM data-transmission attempt accompanied each sensing trial, giving 150 transmission attempts, while 31 measured observations met or exceeded the 80% alert threshold and initiated short message service (SMS) alerts. Location-level GSM measurements produced observed AT+CSQ signal-quality values of 8.70, 14.00, and 18.92 for the indoor laboratory, corridor/entrance, and semi-outdoor locations, corresponding to approximate received signal strength indicator (RSSI) values of -95.6, -85.0, and -75.2 dBm, respectively. The mean application response time was 1.43 ± 0.31 s. Because packet-level acknowledgement outcomes and independent SMS delivery receipts were not retained, no retrospective transmission success or SMS delivery percentages are claimed. The results support the practical use of the prototype for waste-bin monitoring and threshold-based alerting under the tested conditions, particularly in settings where continuous Wi-Fi connectivity may not be available.
Authors
- Olayiwola Charles Adesoba (ORCID: https://orcid.org/0009-0007-1238-2287)
- Samuel O. Falade (ORCID: https://orcid.org/0009-0001-8848-7129)
Institutions
- Federal University of Technology (NG)
Publication Details
- Journal
- Journal of Edge Computing
- Published
- 2026-11-21
- DOI
- https://doi.org/10.55056/jec.1272
- Citations
- 1
- Primary Topic
- Arduino and IoT Applications
- Type
- article
- Field-Weighted Citation Impact
- 1.03