When Does Signal-to-Noise Ratio Modeling Pay Off in HF Receiving Antenna Selection?
High-frequency receiving antennas are usually compared by electromagnetic gain, although reception depends on the signal-to-noise ratio delivered to the receiver. This study asks when modeling that ratio improves antenna selection beyond simple NEC2 gain. Four passive antennas were modeled across eight amateur bands, and a Monte Carlo experiment with 2.4 million environmental realizations, three noise scenarios, and 32 partial-information selection rules compared dynamic and fixed selection, with exact Shapley values attributing the gains. When the antenna can be switched for every realization, complete modeling improved simulated mean performance by 1.382 decibels over total NEC2 gain and changed the chosen antenna in 35.0 percent of cases, but polarization resolution, which NEC2 already supplies, accounted for 83.4 percent of this gain. Beyond polarization-resolved gain, noise coupling and impedance matching added only 0.243 decibels. For a single fixed antenna, complete modeling improved selection by just 0.1305 decibels, while fixed NEC2 selection stayed 3.594 decibels below the ideal switching benchmark. Modeling pays off mainly when polarization is resolved, when several antennas can be switched, and when the candidate set is chosen with care; refining the model of one fixed antenna yields little.
Authors
- Sergio Zúñiga-Jara (ORCID: https://orcid.org/0000-0002-2845-0113)
Institutions
- Universidad Católica del Norte (CL)
Publication Details
- Journal
- Zenodo (CERN European Organization for Nuclear Research)
- Published
- 2026-11-21
- DOI
- https://doi.org/10.5281/zenodo.24412754
- Primary Topic
- Antenna Design and Analysis
- Type
- article
- Field-Weighted Citation Impact
- 0.00