New compositional descriptors for correlations at initial stage of tribological design of the cladded coatings from medium- and high-entropy Ni-based alloys

Development of predictive models for the wear resistance of compositionally complex alloys and high-entropy alloys (HEAs) requires robust compositional descriptors. Conventional metrics often exhibit weak correlations with macroscopic tribological properties, such as coefficient of friction (CoF). In our study, a novel geometric descriptor – modified homogeneity criterion h ¯ – was adapted to predict the CoF for laser-cladded Ni-based alloy coatings of self-fluxing group and related coatings. Unlike standard statistical variables, h ¯ represents a dimensionless topological ratio that balances three-dimensional bulk lattice distortions (proportional to atomic volume) against two-dimensional surface contact mechanics (proportional to atomic cross-sectional area). Based on detailed correlation analysis of 75 experimental cladding regimes (in two variants) for 32 non-equimolar Ni-based alloys, the proposed h ¯ demonstrated a higher linear correlation coefficient with CoF ( R = 0.723) than conventional parameters such as fractions of alloy components, entropy of mixing, atomic size disorder parameter δr, and some statistical parameters. The predictive capability and validity of h ¯ criterion were further corroborated by comparing tribological evaluations of the coatings produced from one of the commercial medium-entropy alloys and new grade of HEA. Two additional new descriptors with some application potential, based on the combinations of h ¯ and δr, were also proposed, and for them the R value reaches 0.739. Evaluation based on multiple regression analysis was also carried out for better estimation of applicability of all new descriptors and this supported our conclusion on the applicability for using of the descriptors.

Authors

Institutions

Publication Details

Journal
Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science
Published
2026-11-20
DOI
https://doi.org/10.1177/09544062261502916
Primary Topic
High Entropy Alloys Studies
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

New compositional descriptors for correlations at initial stage of tribological design of the cladded coatings from medium- and high-entropy Ni-based alloys

Hao Yu, A.I. Gorbunov, Roman Chertovskih, О. Г. Девойно et al.
Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science
High Entropy Alloys Studies
article

New compositional descriptors for correlations at initial stage of tribological design of the cladded coatings from medium- and high-entropy Ni-based alloys

Hao Yu, A.I. Gorbunov, Roman Chertovskih, О. Г. Девойно, Chenchong Wang
article en

Abstract

Development of predictive models for the wear resistance of compositionally complex alloys and high-entropy alloys (HEAs) requires robust compositional descriptors. Conventional metrics often exhibit weak correlations with macroscopic tribological properties, such as coefficient of friction (CoF). In our study, a novel geometric descriptor – modified homogeneity criterion h ¯ – was adapted to predict the CoF for laser-cladded Ni-based alloy coatings of self-fluxing group and related coatings. Unlike standard statistical variables, h ¯ represents a dimensionless topological ratio that balances three-dimensional bulk lattice distortions (proportional to atomic volume) against two-dimensional surface contact mechanics (proportional to atomic cross-sectional area). Based on detailed correlation analysis of 75 experimental cladding regimes (in two variants) for 32 non-equimolar Ni-based alloys, the proposed h ¯ demonstrated a higher linear correlation coefficient with CoF ( R = 0.723) than conventional parameters such as fractions of alloy components, entropy of mixing, atomic size disorder parameter δr, and some statistical parameters. The predictive capability and validity of h ¯ criterion were further corroborated by comparing tribological evaluations of the coatings produced from one of the commercial medium-entropy alloys and new grade of HEA. Two additional new descriptors with some application potential, based on the combinations of h ¯ and δr, were also proposed, and for them the R value reaches 0.739. Evaluation based on multiple regression analysis was also carried out for better estimation of applicability of all new descriptors and this supported our conclusion on the applicability for using of the descriptors.

Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science
Universidade do Porto (PT), Belarusian National Technical University (BY), Northeastern University (CN)
High Entropy Alloys Studies
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon