Experimental investigation into the burning development characteristics of fuel-soaked porous media under external heat radiation
Spill fires from accidental fuel releases threaten roads, tunnels and industrial sites, and covering the spilled fuel with sand is a common emergency measure. The burning of fuel-soaked porous media under external radiation is governed by the coupled evolution of receding evaporation interface, buoyancy-driven plume dynamics, and multiple heat transfer modes at the sand surface. This study investigated the ignition and burning development of fuel-soaked porous media using a cone calorimeter. n-Heptane and quartz sand (1.00–1.18 mm, porosity 48%) were used, with fuel-to-pore volume ratios of 20–80% and incident heat fluxes of 10–50 kW/m 2 . The mass loss rate, sand surface temperature, and flame morphology were measured simultaneously. The burning process can be divided into four stages (ignition, fire growth, gradual decay and rapid decay) followed by the extinction point. The sand surface temperature exhibits a stepwise pattern with quasi-steady heating and burning temperatures, both increasing with external radiation. Dimensionless power-law correlations were established and validated for both stage. The critical mass loss rates at sustained ignition and extinction remain nearly constant across all tested conditions, ranging from 0.45 to 0.69 g/(m 2 ·s) at extinction, because both limits are governed by the same critical flame temperature. The peak mass loss rate increases monotonically with both radiation intensity and fuel volume ratio. A dimensionless model based on the evaporation interface energy balance and fuel layer boundary was developed, with deviations mostly within 20%. The total burning duration decreases with increasing external radiation, following a power relationship with R + R f with an exponent of −1.50, while the fuel volume ratio has a minor effect. These findings provide a quantitative basis for estimating the fire hazards of sand-covered spills, and hence for the design of sand-based mitigation measures.
Authors
- Weiguang Kong
- Hanchao Ma (ORCID: https://orcid.org/0000-0002-5811-4305)
- Shaohua Zhang (ORCID: https://orcid.org/0000-0002-1291-354X)
- Xu Zhai
- Jinlong Zhao
- Hong Huang
Institutions
- China University of Mining and Technology (CN)
- China University of Mining and Technology - Beijing (CN)
- Tsinghua University (CN)
Publication Details
- Journal
- Case Studies in Thermal Engineering
- Published
- 2026-11-21
- DOI
- https://doi.org/10.1016/j.csite.2026.108748
- Primary Topic
- Fire dynamics and safety research
- Type
- article
- Field-Weighted Citation Impact
- 0.00