Scalable Recycling of Wind Turbine Blade Waste Into Epoxy Composites via Powder Filler Incorporation
To address the challenge of recycling waste wind turbine blades, waste blade materials were mechanically ground into powder and used as fillers in an epoxy resin matrix. The resulting epoxy resin composite s were fabricated via amine curing, providing a simple route for the value‐added utilization of thermoset‐based wind turbine blade waste. The effects of curing temperature, curing time, and filler content on the mechanical properties, thermal behavior, and chemical resistance of the composites were systematically investigated. Increasing the filler content generally reduced the mechanical performance; however, optimizing the curing conditions and filler loading enabled the composites to maintain satisfactory mechanical properties. Within the experimental range, tensile and flexural strength of up to 70.45 and 116.93 MPa, respectively, were achieved. This study establishes a processing‐property framework for epoxy composites incorporating recycled wind turbine blade powder and provides a basis for evaluating their potential in scalable recycling applications.
Authors
- Hongping Quan (ORCID: https://orcid.org/0000-0001-5277-7477)
- Deng Chen (ORCID: https://orcid.org/0000-0001-6359-801X)
- Na Sun (ORCID: https://orcid.org/0009-0007-9185-8115)
- Yuwei Long
- Yuanli Sun
- Jiao Ma
Institutions
- Southwest Petroleum University (CN)
Publication Details
- Journal
- Polymer Composites
- Published
- 2026-11-20
- DOI
- https://doi.org/10.1002/pc.71757
- Primary Topic
- Fiber-reinforced polymer composites
- Type
- article
- Field-Weighted Citation Impact
- 0.00