Design of Data-Acquisition Hardware Circuitry for a Legacy Obara STN21 Resistance Spot-Weld Controller
Legacy resistance spot welding (RSW) timers on many automotive body-in-white lines expose weld parameters only through a handheld teaching pendant, which blocks automated quality logging. This paper presents the design of a non-intrusive, read-only data-acquisition (DAQ) node for the Obara STN21 single-phase AC weld timer, developed for a digitalisation project at a commercial vehicle OEM in South India. Analysis of the controller manual shows that its only documented machine-readable fieldbus is an optional DeviceNet slave interface with a 5-byte input image, not the RS-485 link assumed in the project brief, so the node measures the process externally. Two circuits are compared in a ten-criterion matrix: Option A, with per-channel AMC1200 isolation amplifiers, a 6N137 status optocoupler, and an RS-485/Modbus link, and Option B, with whole-node isolation, PC817 status inputs and isolated Ethernet. Option A was selected for the first build. Design calculations expose integrator-range, ADC-throughput, and component-rating issues in both drafts, including load-cell grounding, and propose corrections; the integrator and load-cell corrections are built into the selected Option A design, while the ADC-simultaneity limitation remains open. A low-voltage prototype (ESP32 with ADS1115, potentiometer-simulated sensors) verified I²C communication, full-scale scaling within the reading precision, weld start/stop detection at a 1 kA threshold, per-weld summaries, and channel independence. Validation under live welding conditions remains future work.
Authors
- S. Uma Maheswari (ORCID: https://orcid.org/0000-0002-2926-2149)
- Aniketh Arvind
- Ravi Teja Eegalapati
- S. Suresh
- S. Swetha Sri
- D. L. Tharanya
Institutions
- Easwari Engineering College (IN)
- Ashok Leyland (India) (IN)
Publication Details
- Journal
- Asian Journal of Advanced Research and Reports
- Published
- 2026-11-21
- DOI
- https://doi.org/10.9734/ajarr/2026/v20i121519
- Primary Topic
- Embedded Systems and FPGA Design
- Type
- article
- Field-Weighted Citation Impact
- 0.00