Removing Microplastics from Drinking Water through Spin-Down Filtration
Drinking water treatment facilities were not designed to remove microplastics, and as a result, tap water often contains microplastics. Consequently, in-home microplastic filters have been commercialized; however, most suffer from slow flow rates. Here, we achieve >95% microplastic removal in 2.5 min for polystyrene microspheres (10 μm) at household-relevant flow rates (3 L/min) using a low-cost stainless-steel mesh in a spin-down sediment filter. We show that both physical trapping and hydrophobic interactions drive microplastic removal. In addition, at low microplastic concentrations (∼100 microplastics/L), this filter can achieve high removal efficiencies (>98%) for four common microplastic types in a single pass. Lastly, the filter showed similar, high removal performance for a mixed microplastic suspension compared with commercial filters.
Authors
- Anne Jennifer McNeil (ORCID: https://orcid.org/0000-0003-4591-3308)
- Henry E. Thurber (ORCID: https://orcid.org/0000-0002-8245-6444)
- Malavika Ramkumar (ORCID: https://orcid.org/0009-0008-3222-3205)
- Jack W. Turnbull (ORCID: https://orcid.org/0009-0006-9871-458X)
Institutions
- University of Michigan (US)
Publication Details
- Journal
- ACS ES&T Engineering
- Published
- 2026-11-21
- DOI
- https://doi.org/10.1021/acsestengg.6c00830
- Primary Topic
- Microplastics and Plastic Pollution
- Type
- article
- Field-Weighted Citation Impact
- 0.00