Smart Liquid-Cooled Geared Motor System with ESP32-Based Automatic Temperature Control for Electric Bicycles
Electric bicycles (e-bikes) are widely used for commuting, delivery and recreation, but their geared motors can overheat during continuous operation, uphill riding and heavy loading, which lowers efficiency and shortens service life. Natural air cooling, commonly used in e-bike motors, has limited heat-removal capacity and cannot respond to changes in motor temperature. This paper presents the design and prototype implementation of a smart liquid-cooled geared motor system for an e-bicycle. A water-based coolant is circulated by a 24 V DC pump through a cooling jacket around the motor and through a fan-assisted radiator. An ESP32 microcontroller reads a motor-mounted temperature sensor, compares the reading with a predefined limit and switches the pump and fan through a relay, while a display shows motor temperature and cooling status. The system is powered by a 24 V, 30 Ah battery, with a regulated supply for the control electronics. The assembled prototype was subjected to circulation, sensor, controller, electrical and load tests, and it activated cooling automatically when the set temperature limit was reached. The work demonstrates a low-cost, practical approach to temperature-controlled cooling of e-bike motors; quantitative thermal characterisation is identified as future work. Key Words: Electric bicycle, geared motor, liquid cooling, thermal management, ESP32, temperature control.
Authors
- N P Shashank
- Mukesh T C
- Sushmitha V
- Swathi V C
- Chethana H S
Publication Details
- Journal
- International Scientific Journal of Engineering and Management
- Published
- 2026-11-21
- DOI
- https://doi.org/10.55041/isjem08765
- Primary Topic
- Electric Motor Design and Analysis
- Type
- article
- Field-Weighted Citation Impact
- 0.00