Thermal, Mechanical, and Biodegradation Properties of Polylactide/Hemp Fibre Composites

Biodegradable composites based on polylactide (PLA) and industrial hemp fibres were prepared by melt processing in a co-rotating twin-screw extruder and characterised in terms of their thermomechanical and biodegradation behaviour. Composites containing 5, 10, 20, and 30 wt.% hemp were produced and investigated using thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), scanning electron microscopy (SEM), tensile testing, melt flow rate (MFR) determination, and soil burial biodegradation tests conducted over 60 days. TGA results showed that the addition of hemp decreased the thermal stability of the composites, shifting the onset of degradation to lower temperatures. DSC analysis revealed that hemp fibres acted as nucleating agents, promoting heterogeneous nucleation and inducing melting–recrystallisation phenomena, resulting in the appearance of a double melting peak. SEM micrographs indicated good dispersion and acceptable interfacial adhesion at lower hemp loadings (≤ 10 wt.%), while higher loadings led to agglomeration, void formation, and phase separation. Tensile strength and elongation at break decreased progressively with increasing hemp content, while the tensile modulus showed a modest improvement up to 10 wt.% hemp. Notably, the melt flow rate increased significantly with hemp loading. This unusually high increase in melt flow rate at elevated hemp contents may suggest partial degradation of the PLA matrix during processing. Biodegradation tests demonstrated that higher hemp content accelerated mass loss in soil. The results indicate that PLA/hemp biodegradable composites with a favourable balance of thermal, mechanical, and processing properties can be obtained at hemp loadings of up to 10 wt.%, making them promising sustainable materials.

Authors

Institutions

Publication Details

Journal
Kemija u industriji
Published
2026-11-21
DOI
https://doi.org/10.15255/kui.2026.031
Primary Topic
Natural Fiber Reinforced Composites
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Thermal, Mechanical, and Biodegradation Properties of Polylactide/Hemp Fibre Composites

Zvonimir Katančić, Martina Kujavić, Martina Krajpl
Kemija u industriji
Natural Fiber Reinforced Composites
article

Thermal, Mechanical, and Biodegradation Properties of Polylactide/Hemp Fibre Composites

Zvonimir Katančić, Martina Kujavić, Martina Krajpl
article en

Abstract

Biodegradable composites based on polylactide (PLA) and industrial hemp fibres were prepared by melt processing in a co-rotating twin-screw extruder and characterised in terms of their thermomechanical and biodegradation behaviour. Composites containing 5, 10, 20, and 30 wt.% hemp were produced and investigated using thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), scanning electron microscopy (SEM), tensile testing, melt flow rate (MFR) determination, and soil burial biodegradation tests conducted over 60 days. TGA results showed that the addition of hemp decreased the thermal stability of the composites, shifting the onset of degradation to lower temperatures. DSC analysis revealed that hemp fibres acted as nucleating agents, promoting heterogeneous nucleation and inducing melting–recrystallisation phenomena, resulting in the appearance of a double melting peak. SEM micrographs indicated good dispersion and acceptable interfacial adhesion at lower hemp loadings (≤ 10 wt.%), while higher loadings led to agglomeration, void formation, and phase separation. Tensile strength and elongation at break decreased progressively with increasing hemp content, while the tensile modulus showed a modest improvement up to 10 wt.% hemp. Notably, the melt flow rate increased significantly with hemp loading. This unusually high increase in melt flow rate at elevated hemp contents may suggest partial degradation of the PLA matrix during processing. Biodegradation tests demonstrated that higher hemp content accelerated mass loss in soil. The results indicate that PLA/hemp biodegradable composites with a favourable balance of thermal, mechanical, and processing properties can be obtained at hemp loadings of up to 10 wt.%, making them promising sustainable materials.

Kemija u industriji(13)
University of Zagreb (HR)
Natural Fiber Reinforced Composites
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon