A 1D inverse finite-element framework for shape-sensing and assessment of multiple degrading boundary conditions in multi-span beam-like structures
In multi-span beam-like structures, continuity couples the response of adjacent spans; hence, degradation or settlement at one or more supports can alter load-transfer throughout the structure. Since strain-based shape-sensing methods commonly assume ideal support constraints, these changes can bias the reconstructed deformation field, although the actual condition of the supports remains unknown. This study develops a one-dimensional inverse finite-element method (1D iFEM) framework for simultaneous deformation reconstruction and stiffness-based condition assessment of multiple predefined candidate vertical supports. The associated support constraints are released so that their settlements are reconstructed directly from strain measurements. When the resulting displacement field is not uniquely defined, independent displacement measurements are introduced as kinematic anchors, with one anchor for each remaining strain-unobservable displacement mode. Support reactions are recovered from the reconstructed curvature and were combined with the estimated settlements to determine the equivalent vertical stiffnesses. The framework is experimentally validated on a two-span aluminium beam instrumented with fibre Bragg grating strain sensors, with individual and combined-support-compliance configurations representative of degradation reproduced by vertical springs under static and quasi-static moving loading. Under repeated static loading, the mean normalized mean absolute displacement error ( NMAE v ) ranged from 0 . 96 % to 4 . 94 % , the maximum mean local laser-validation error was 6 . 84 % and the maximum relative difference between the mean estimated and target support stiffnesses was 5 . 63 % . Under moving loading, displacement root-mean-square errors of 0 . 20 mm and 0 . 25 mm were obtained at two independent validation locations, whereas the median stiffness differences were 1 . 26 % and 6 . 27 % for engaged and sufficiently excited supports. Monte Carlo simulations quantify sensitivity to strain noise and displacement–anchor uncertainty, and the workflow requires approximately 13 ms per update. The framework therefore enables deformation reconstruction under non-ideal boundary conditions and equivalent stiffness-based assessment of multiple degrading supports.
Authors
- Claudio Sbarufatti (ORCID: https://orcid.org/0000-0001-5511-8194)
- Jacopo Bardiani (ORCID: https://orcid.org/0000-0003-4572-8073)
- Hung Chih Wu Chen (ORCID: https://orcid.org/0000-0002-4059-4398)
- Luca Mastrorillo
Institutions
- Politecnico di Milano (IT)
Publication Details
- Journal
- Structural Health Monitoring
- Published
- 2026-11-20
- DOI
- https://doi.org/10.1177/14759217261500630
- Primary Topic
- Structural Health Monitoring Techniques
- Type
- article
- Field-Weighted Citation Impact
- 0.00