From Sodium to Potassium: Optimizing Alkali-Activated GGBS Systems for Enhanced Sulfate Resistance through Mechanochemical Treatment

The long-term sulfate resistance of alkali-activated slag systems remains underexplored, especially under low-alkali conditions combined with mechanochemical treatment. Existing studies often rely on high-molarity activators, which pose safety, cost, and durability challenges. This study addresses this gap by evaluating the sulfate resistance of mechanochemically activated ground granulated blast furnace slag (GGBS) mortars using low-concentration (2M) sodium (AAN) and potassium (AAK) activators, compared to portland pozzolana cement (CON). GGBS was ground along with silicate powders to enhance reactivity, then activated using 2M NaOH or KOH. Mortars were exposed to 5% Na 2 SO 4 and MgSO 4 for 105 days. Durability was assessed via mass change, linear expansion, strength loss, and advanced characterization, by x-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), and scanning electron microscopy/energy-dispersive x-ray (FESEM-EDX). Mechanochemical activation enabled effective geopolymerization at low alkali levels. Potassium-activated mortars showed the best performance: minimal mass loss (0.3%–0.4%), expansion (0.4%–0.6%), and strength degradation (8.4%–9.4%). Sodium-activated systems showed moderate deterioration. CON exhibited severe damage, with 3.4%–5.2% mass loss, 0.9%–1.4% expansion, and 12%–17% strength loss. MgSO 4 attack was more severe than Na 2 SO 4 across all binders. XRD and FTIR confirmed phase stability in AAK systems (kalsilite, leucite, muscovite) and extensive degradation in CON (brucite, M─S─H). FESEM-EDX showed better matrix integrity and calcium retention in AAK mortars. This study demonstrates that mechanochemical activation at 2M alkali concentration offers a viable pathway to produce sulfate-resistant alkali-activated mortars. It enables safer, more sustainable binder systems without compromising durability, advancing practical application of low-alkali-activated slag mortars (AAMs) in aggressive environments.

Authors

Publication Details

Journal
Journal of Materials in Civil Engineering
Published
2026-11-21
DOI
https://doi.org/10.1061/jmcee7.mteng-23737
Primary Topic
Concrete and Cement Materials Research
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

From Sodium to Potassium: Optimizing Alkali-Activated GGBS Systems for Enhanced Sulfate Resistance through Mechanochemical Treatment

Sushil Singh Baghel, Sudhir Singh Bhadauria
Journal of Materials in Civil Engineering
Concrete and Cement Materials Research
article

From Sodium to Potassium: Optimizing Alkali-Activated GGBS Systems for Enhanced Sulfate Resistance through Mechanochemical Treatment

Sushil Singh Baghel, Sudhir Singh Bhadauria
article en

Abstract

The long-term sulfate resistance of alkali-activated slag systems remains underexplored, especially under low-alkali conditions combined with mechanochemical treatment. Existing studies often rely on high-molarity activators, which pose safety, cost, and durability challenges. This study addresses this gap by evaluating the sulfate resistance of mechanochemically activated ground granulated blast furnace slag (GGBS) mortars using low-concentration (2M) sodium (AAN) and potassium (AAK) activators, compared to portland pozzolana cement (CON). GGBS was ground along with silicate powders to enhance reactivity, then activated using 2M NaOH or KOH. Mortars were exposed to 5% Na 2 SO 4 and MgSO 4 for 105 days. Durability was assessed via mass change, linear expansion, strength loss, and advanced characterization, by x-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), and scanning electron microscopy/energy-dispersive x-ray (FESEM-EDX). Mechanochemical activation enabled effective geopolymerization at low alkali levels. Potassium-activated mortars showed the best performance: minimal mass loss (0.3%–0.4%), expansion (0.4%–0.6%), and strength degradation (8.4%–9.4%). Sodium-activated systems showed moderate deterioration. CON exhibited severe damage, with 3.4%–5.2% mass loss, 0.9%–1.4% expansion, and 12%–17% strength loss. MgSO 4 attack was more severe than Na 2 SO 4 across all binders. XRD and FTIR confirmed phase stability in AAK systems (kalsilite, leucite, muscovite) and extensive degradation in CON (brucite, M─S─H). FESEM-EDX showed better matrix integrity and calcium retention in AAK mortars. This study demonstrates that mechanochemical activation at 2M alkali concentration offers a viable pathway to produce sulfate-resistant alkali-activated mortars. It enables safer, more sustainable binder systems without compromising durability, advancing practical application of low-alkali-activated slag mortars (AAMs) in aggressive environments.

Journal of Materials in Civil EngineeringVol. 39(4)
Concrete and Cement Materials Research
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon
From Sodium to Potassium: Optimizing Alkali-Activated GGBS Systems for Enhanced Sulfate Resistance through Mechanochemical Treatment — Sushil Singh Baghel, Sudhir Singh Bhadauria · Journal of Materials in Civil Engineering (2026) | TGRS Research Map | TGRS