Comparative analysis of screw withdrawal resistance in Scots pine and particleboard subjected to cyclic assembly and disassembly
The load-bearing capacity and overall structural integrity of ready-to-assemble (RTA) furniture are primarily determined by the screw withdrawal resistance (SWR) of the joint interfaces. While the parameters influencing initial withdrawal capacity are well established, the mechanical degradation of the internal borehole surface during repeated assembly–disassembly cycles remains insufficiently characterized. This study investigates the impact of cyclic assembly–disassembly on the SWR of Scots pine ( Pinus sylvestris L.) and furniture-grade particleboard (P2 class). Two distinct fastener types were evaluated: 7 mm Confirmat screws (installed with pilot holes) and 3 mm universal wood screws (installed without pilot holes). SWR was evaluated using a universal testing machine across three experimental variants: after initial insertion (0 cycles), after one assembly–disassembly cycle (1 cycle), and after five assembly–disassembly cycles (5 cycles). Data screening was performed using Tukey's fences (1.5×IQR), followed by a three-way ANOVA ( α = 0.05) to evaluate main and interaction effects. The results reveal a pronounced material-dependent response to cyclic loading. In Scots pine, Confirmat screws exhibited a statistically significant initial SWR reduction of 13.97% following the first assembly–disassembly cycle, with cumulative degradation reaching 18.61% after five cycles. In contrast, smaller-diameter universal wood screws demonstrated a ‘delayed’ degradation profile; the initial change was negligible (+0.10%), yet the cumulative reduction reached 17.08% by the fifth cycle. Particleboard demonstrated remarkable structural resilience, maintaining statistically constant SWR values across all tested assembly–disassembly cycle ranges despite a lower baseline capacity than solid wood. These findings confirm that joint degradation is a synergistic function of material anisotropy and fastener geometry. The data demonstrate that lower material anisotropy enhances joint resilience to repeated installation. From a structural design perspective, a 19% reduction in load-bearing capacity must be accounted for in solid-wood joints intended for reassembly, whereas particleboard offers superior resilience to repeated assembly and disassembly.
Authors
- Zbigniew Potok (ORCID: https://orcid.org/0000-0001-9356-0426)
- Maciej Sydor (ORCID: https://orcid.org/0000-0003-0076-3190)
- Kacper Pędziński
Institutions
- Poznań University of Technology (PL)
- University of Life Sciences in Poznań (PL)
Publication Details
- Journal
- European Journal of Wood and Wood Products
- Published
- 2026-11-21
- DOI
- https://doi.org/10.1007/s00107-026-02515-0
- Primary Topic
- Wood Treatment and Properties
- Type
- article
- Field-Weighted Citation Impact
- 0.00