Stacking‐Sequence Effects on Polymer‐Laminate Damage Localization in Al 2 O 3 / UHMWPE and TiB 2 /Kevlar/Al Hybrid Systems Under High‐Velocity Impact

Polymer‐fiber laminates dissipate impact energy through tension, interlaminar separation, and deformation, with their response influenced by their position within hybrid targets. One light‐gas‐gun test at approximately 800 m/s was conducted for each of the Al 2 O 3 /UHMWPE and Kevlar/TiB 2 /Al targets. Three‐dimensional LS‐DYNA simulations and rear‐array acceleration measurements were used to investigate the impact response. The simulated Kevlar opening diameter differed from the measured value by 0.9%, while the UHMWPE rear‐face deflection was underpredicted by 19.5%. In ceramic‐front arrangements, ceramic fracture and lateral load spreading preceded pronounced polymer deformation. Reversing the ceramic–polymer order in simulations exposed the polymer to concentrated loading earlier, producing a narrower and more continuous axial tensile–shear damage path. Across the simulated velocity range, the central polymer damage‐zone width increased from 8.3 to 11.4 mm for Al 2 O 3 /UHMWPE and from 10.5 to 12.3 mm for Kevlar/TiB 2 /Al. Simulations bracketed full‐target perforation between 1200 and 1400 m/s in both architectures. In the front‐Kevlar simulations, the central damage path became more continuous between 800 and 1000 m/s while the full target remained unperforated. These velocity‐dependent findings are numerical predictions, with experimental support limited to the tested configurations at approximately 800 m/s.

Authors

Institutions

Publication Details

Journal
Polymer Composites
Published
2026-11-20
DOI
https://doi.org/10.1002/pc.71831
Primary Topic
High-Velocity Impact and Material Behavior
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Stacking‐Sequence Effects on Polymer‐Laminate Damage Localization in Al 2 O 3 / UHMWPE and TiB 2 /Kevlar/Al Hybrid Systems Under High‐Velocity Impact

Jianong Yu, Biao Wang, Xiaoying Guan, Min Qin et al.
Polymer Composites
High-Velocity Impact and Material Behavior
article

Stacking‐Sequence Effects on Polymer‐Laminate Damage Localization in Al 2 O 3 / UHMWPE and TiB 2 /Kevlar/Al Hybrid Systems Under High‐Velocity Impact

Jianong Yu, Biao Wang, Xiaoying Guan, Min Qin, Kai Wang, Guiqin Gu, Bingzheng Lei, Yongjun Deng, Tingting Li, Xiaojian Yi
article en

Abstract

Polymer‐fiber laminates dissipate impact energy through tension, interlaminar separation, and deformation, with their response influenced by their position within hybrid targets. One light‐gas‐gun test at approximately 800 m/s was conducted for each of the Al 2 O 3 /UHMWPE and Kevlar/TiB 2 /Al targets. Three‐dimensional LS‐DYNA simulations and rear‐array acceleration measurements were used to investigate the impact response. The simulated Kevlar opening diameter differed from the measured value by 0.9%, while the UHMWPE rear‐face deflection was underpredicted by 19.5%. In ceramic‐front arrangements, ceramic fracture and lateral load spreading preceded pronounced polymer deformation. Reversing the ceramic–polymer order in simulations exposed the polymer to concentrated loading earlier, producing a narrower and more continuous axial tensile–shear damage path. Across the simulated velocity range, the central polymer damage‐zone width increased from 8.3 to 11.4 mm for Al 2 O 3 /UHMWPE and from 10.5 to 12.3 mm for Kevlar/TiB 2 /Al. Simulations bracketed full‐target perforation between 1200 and 1400 m/s in both architectures. In the front‐Kevlar simulations, the central damage path became more continuous between 800 and 1000 m/s while the full target remained unperforated. These velocity‐dependent findings are numerical predictions, with experimental support limited to the tested configurations at approximately 800 m/s.

Polymer Composites
Beijing Institute of Technology (CN), Southwest University of Science and Technology (CN), Vaughn College of Aeronautics and Technology (US), Beijing Jiaotong University (CN), Beijing Research Institute of Mechanical and Electrical Technology (CN), Science and Technology Department of Sichuan Province (CN), China University of Petroleum, East China (CN), Nanjing University of Aeronautics and Astronautics (CN)
High-Velocity Impact and Material Behavior
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon