CFD-guided aerodynamic redesign of an electric bus for lower drag and energy demand
Electric buses face range and battery-temperature limits, and aerodynamic drag is a major part of their energy demand at higher speeds. This study examines how three features of an electric bus, the windshield inclination, the ground clearance and the roof transition angle, affect its aerodynamics, using steady computational fluid dynamics simulations of a 1:10 model of the BYD K9. Each feature was varied in turn, and the final combined design was simulated directly. Grid convergence was confirmed on four meshes, and the normalized flow fields did not depend on Reynolds number over the simulated range. Inclining the windshield to 27° reduced the drag coefficient by 5.7%. Raising the ground clearance from 370 to 430 mm reduced it by a further 2.3%, while lowering the estimated underbody convective heat transfer by 1.2%. A 45° roof transition gave the largest single reduction and brought lift close to neutral. The final design lowered the drag coefficient from 0.603 to 0.501, a 16.9% reduction, which cuts the aerodynamic energy demand at 100 km/h from 0.70 to 0.58 kWh/km. The results come from steady, zero-yaw simulations without experimental validation.
Authors
- Ramesh Babu Nallamothu (ORCID: https://orcid.org/0000-0001-7600-9210)
- Addis Tefera Tirfe
- Ataklti Dawit Fisha
- Bereket Gebrehawerya (ORCID: https://orcid.org/0000-0002-9353-5455)
Institutions
- Raya University (ET)
- Mohan Babu University (IN)
- Adama Science and Technology University (ET)
Publication Details
- Journal
- Scientific Reports
- Published
- 2026-11-21
- DOI
- https://doi.org/10.1038/s41598-026-81203-8
- Primary Topic
- Aerodynamics and Fluid Dynamics Research
- Type
- article
- Field-Weighted Citation Impact
- 0.00