Friction, contraction and dilation of sands subjected to isotropic and modified K0 consolidation conditions
The major principal stress during normal ๐พ0 consolidation usually aligns with the loading direction during shearing in triaxial tests, whereas a modified ๐พ0 consolidation, in which the minor principal stress aligns with the loading direction and corresponds to the scenario where the in-situ ground is loaded horizontally, is investigated in this study. Triaxial tests and the corresponding coupled discrete element method-finite difference method (DEM-FDM) simulations were conducted on loose and dense sand consolidated under both isotropic and the modified ๐พ0 conditions to investigate their effects on the shearing responses, with a focus on strength mobilization and volumetric behavior. At the same radial effective stress, specimens subjected to modified ๐พ0 consolidation exhibited higher maximum friction and contraction angles and a modest increase in maximum dilation angle relative to isotropically consolidated specimens. Because the two groups also differed in initial mean effective stress, these comparisons reflect the combined influence of stress state and consolidation history. Under both consolidation conditions, the maximum contraction angle increased with initial mean effective stress, whereas the maximum friction and dilation angles decreased. A general sawtooth model incorporating both contraction and dilation is then proposed and explains mathematically that the maximum contraction occurs at the beginning of shearing while the maximum dilation is mobilized at the peak deviator stress
Authors
- Stuart K. Haigh (ORCID: https://orcid.org/0000-0003-3782-0099)
- Tianzheng Fu (ORCID: https://orcid.org/0000-0002-8658-8743)
- Gang Zheng
- Jun Ma
- chuhan Deng
Publication Details
- Journal
- Apollo
- Published
- 2026-11-21
- DOI
- https://doi.org/10.17863/cam.136962
- Primary Topic
- Geotechnical Engineering and Soil Mechanics
- Type
- article
- Field-Weighted Citation Impact
- 0.00