Structure–Processing Relationships in Nanomodified Urea–Formaldehyde Adhesives: Effects of Inorganic and Cellulosic Nanomaterials on Rheology and Curing Behavior

Modifying urea–formaldehyde (UF) adhesives with nanomaterials offers opportunities to tailor rheological properties and curing behavior for wood‐based composite manufacturing. This study comparatively investigates four inorganic oxides (SiO 2 , TiO 2 , Al 2 O 3 , and ZnO) and two cellulosic nanomaterials (cellulose nanocrystals [CNC] and cellulose nanofibrils [CNF]) incorporated at 1, 3, and 5 wt% into commercial UF resin. Unlike studies focusing primarily on individual nanomodifiers or final composite performance, this work provides a direct comparative assessment of inorganic and cellulosic nanomaterials within the same UF resin–hardener system, establishing their concentration‐dependent effects on adhesive rheology and condensation kinetics. Nanomaterial type and concentration strongly influenced adhesive viscosity and condensation time. CNF caused the greatest viscosity increase, reaching 3771 mPa.s at 1 wt%, while concentrations ≥ 3 wt% produced non‐flowable pastes. SiO 2 exhibited a nonlinear viscosity increase, reaching 18,162 mPa.s at 5 wt%. In contrast, TiO 2 and Al 2 O 3 maintained viscosities below 700 mPa.s at 5 wt%. TiO 2 accelerated condensation, reducing the condensation time by 22.7% at 3 wt%, whereas Al 2 O 3 had negligible effects. Higher SiO 2 and CNC loadings prolonged condensation, while CNF delayed curing. ZnO strongly inhibited curing, with condensation times exceeding 660 s, accompanied by persistent tackiness and severe foaming. These findings identify TiO 2 (1–3 wt%) and SiO 2 (1–2 wt%) as promising modifiers, whereas high CNF loadings and unmodified ZnO are unsuitable under the investigated conditions. The results provide practical guidance for selecting nanomodifiers to balance processability and curing performance.

Authors

Institutions

Publication Details

Journal
Polymer Engineering and Science
Published
2026-11-21
DOI
https://doi.org/10.1002/pen.71036
Primary Topic
Wood Treatment and Properties
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Structure–Processing Relationships in Nanomodified Urea–Formaldehyde Adhesives: Effects of Inorganic and Cellulosic Nanomaterials on Rheology and Curing Behavior

Ján Sedliačik, Pavlo Bekhta, Volodymyr Mayevskyy, Serhiy‐Ivan Bekhta
Polymer Engineering and Science
Wood Treatment and Properties
article

Structure–Processing Relationships in Nanomodified Urea–Formaldehyde Adhesives: Effects of Inorganic and Cellulosic Nanomaterials on Rheology and Curing Behavior

Ján Sedliačik, Pavlo Bekhta, Volodymyr Mayevskyy, Serhiy‐Ivan Bekhta
article en

Abstract

Modifying urea–formaldehyde (UF) adhesives with nanomaterials offers opportunities to tailor rheological properties and curing behavior for wood‐based composite manufacturing. This study comparatively investigates four inorganic oxides (SiO 2 , TiO 2 , Al 2 O 3 , and ZnO) and two cellulosic nanomaterials (cellulose nanocrystals [CNC] and cellulose nanofibrils [CNF]) incorporated at 1, 3, and 5 wt% into commercial UF resin. Unlike studies focusing primarily on individual nanomodifiers or final composite performance, this work provides a direct comparative assessment of inorganic and cellulosic nanomaterials within the same UF resin–hardener system, establishing their concentration‐dependent effects on adhesive rheology and condensation kinetics. Nanomaterial type and concentration strongly influenced adhesive viscosity and condensation time. CNF caused the greatest viscosity increase, reaching 3771 mPa.s at 1 wt%, while concentrations ≥ 3 wt% produced non‐flowable pastes. SiO 2 exhibited a nonlinear viscosity increase, reaching 18,162 mPa.s at 5 wt%. In contrast, TiO 2 and Al 2 O 3 maintained viscosities below 700 mPa.s at 5 wt%. TiO 2 accelerated condensation, reducing the condensation time by 22.7% at 3 wt%, whereas Al 2 O 3 had negligible effects. Higher SiO 2 and CNC loadings prolonged condensation, while CNF delayed curing. ZnO strongly inhibited curing, with condensation times exceeding 660 s, accompanied by persistent tackiness and severe foaming. These findings identify TiO 2 (1–3 wt%) and SiO 2 (1–2 wt%) as promising modifiers, whereas high CNF loadings and unmodified ZnO are unsuitable under the investigated conditions. The results provide practical guidance for selecting nanomodifiers to balance processability and curing performance.

Polymer Engineering and Science
Ukrainian National Forestry University (UA), Technická univerzita vo Zvolene (SK), Mendel University in Brno (CZ)
Wood Treatment and Properties
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon