Magnetic vs. Mechanical Tuned Mass Dampers: Kinematic Analysis of N52 Eddy Current Arrays
Traditional Tuned Mass Dampers used to stabilize tall buildings rely on mechanical springs and hydraulic dashpots to absorb resonant vibrations from wind and earthquakes. However, these mechanical assemblies suffer from static friction dead zones during small vibrations, long-term mechanical fatigue, and fluid viscosity changes caused by temperature shifts. This paper investigates a completely non-contact magnetic alternative that uses repulsive N52 neodymium permanent magnet arrays for restoring stiffness and electromagnetic eddy current induction within an aluminum conductive fin for frictionless damping. Five iterative computer-aided design assemblies were modeled in Onshape to eliminate sliding rail friction and concentrate magnetic field gradients, leading to the fabrication of a rigid, CNC-milled aluminum test chassis mounted on a scaled structural frame. Sixty free-decay and shake-table oscillation trials were conducted across five different magnet air-gap spacings, tracking over twelve hundred high-speed kinematic data points. The experimental results demonstrate that adjusting the physical air gap provides smooth, predictable control over the damping ratio in close agreement with classical electromagnetic theory. At the optimal spacing, the magnetic damper matches ideal theoretical tuning, sharply reduces peak structural sway, and outperforms an equivalent mechanical spring-dashpot system during low-amplitude shaking due to the complete absence of breakaway friction.
Authors
- Kyle Liang
Publication Details
- Journal
- Zenodo (CERN European Organization for Nuclear Research)
- Published
- 2026-11-20
- DOI
- https://doi.org/10.5281/zenodo.24409865
- Primary Topic
- Vibration Control and Rheological Fluids
- Type
- preprint