A Unified Model of Tensioned Films Under Hydrostatic Configuration‐Dependent Loading: Application to Tunable Liquid Lenses
Accurate prediction of thin‐film deflection under hydrostatic loading remains a fundamental problem in fluid–structure interaction. Existing models either prescribe hydrostatic pressure as a deformation‐independent uniform load or employ simplified configuration‐dependent loading (CDL) formulations that idealize the film as a tension‐only membrane or a pure‐bending plate. A general theory that simultaneously incorporates bending rigidity and in‐plane pretension is still lacking. Here, we develop a unified linear plate model in which the hydrostatic load evolves self consistently with film deformation under exact liquid‐volume conservation. Three filling regimes are identified according to the relative position of the deformed liquid surface and the undeformed plate plane. Closed‐form solutions are derived for the overfilled and flush‐filled regimes, and a semi‐analytical solution is derived for the underfilled regime. Equivalent dimensionless parameterizations are introduced to construct phase diagrams describing the competition between hydrostatic loading and structural resistance and between bending stiffness and pretension. Their intersection defines a coupled balance point at which the two mechanisms are simultaneously matched. The model recovers the previously established CDL membrane and pure‐bending plate theories in the corresponding limits. Comparisons with uniform‐pressure solutions quantify the errors induced by neglecting deformation‐driven liquid redistribution. For tunable liquid lenses, varying the in‐plane tension continuously regulates the interfacial curvature and paraxial focal length, and experiments on pretensioned polydimethylsiloxane films validate the analytical predictions. The proposed framework provides an analytical basis for thin elastic structures subjected to deformation‐dependent hydrostatic loading.
Authors
- Rongjiang Li (ORCID: https://orcid.org/0009-0006-0663-6183)
- Hiroatsu Fukuda (ORCID: https://orcid.org/0000-0003-4223-035X)
- Weijun Gao (ORCID: https://orcid.org/0000-0003-0299-3686)
- Weiting Chen (ORCID: https://orcid.org/0000-0002-0991-6248)
- Yuan Liang (ORCID: https://orcid.org/0009-0002-1201-6280)
Institutions
- The University of Kitakyushu (JP)
- Chinese Academy of Sciences (CN)
- Academy of Mathematics and Systems Science (CN)
- Institute of Mechanics (CN)
- University of Chinese Academy of Sciences (CN)
- State Key Laboratory of Nonlinear Mechanics (CN)
Publication Details
- Journal
- Journal of Applied Mechanics
- Published
- 2026-11-21
- DOI
- https://doi.org/10.1002/joam.70000
- Primary Topic
- Electrowetting and Microfluidic Technologies
- Type
- article
- Field-Weighted Citation Impact
- 0.00