Mechanical and microstructural behavior of ASTM A588 weathering steel following a prolonged bridge fire
Assessing the residual capacity of fire-damaged structural steel is critical for guiding rehabilitation decisions, as prolonged fire exposure and subsequent fire extinguishing can degrade mechanical properties of steel. However, realistic fire-induced mechanical degradation data remain limited, particularly for weathering grades of structural steels. This study investigates the post-fire mechanical, microstructural, and surface patina behavior of ASTM A588 weathering steel using specimens from a VT-14 bridge steel that suffered severe deformation during a 36-h vehicular fire involving an overturned propane semi-trailer. To assess the ASTM A588 uncoated weathering steel’s post-fire behavior, the following series of tests were conducted: metrology of the deformation fields, mechanical testing (uniaxial tension, impact toughness, and hardness), chemical analysis of the patina, and metallographic evaluations. Post-fire mechanical testing revealed up to a 22% reduction in yield strength within the zone of maximum thermal exposure, relative to steel extracted from an unaffected, ambient-temperature baseline region of the same bridge girder, alongside a minor reduction in tensile strength (by 10%) and an increase in ductility (by 8%). The macrohardness and microhardness of the fire-damaged steel reduced by 9% and 18%, respectively, correlating with the yield strength reduction. Impact toughness experienced nominal changes across the girder regions and remained well above AASHTO limits. Microstructural results indicated that the metallurgical phase composition remained consistent, though experienced coarsening in ferrite grain and pearlite colony sizes dictated by the fire's thermal history and cooling rate. Direct fire exposure partially transformed the patina’s goethite to magnetite and hematite and increased the protective layer thickness by approximately eightfold, introducing new considerations for long-term durability. Despite some mechanical degradation and altered patina morphology, the steel largely retained its material-level viability, suggesting that localized repair could be pursued for the fire-affected steel, provided that global deformations and site constraints permit.
Authors
- Hizb Ullah Sajid (ORCID: https://orcid.org/0000-0002-2370-8592)
- Ryan Slein (ORCID: https://orcid.org/0000-0002-7961-7091)
Institutions
- Federal Highway Administration (US)
- Genex Systems (United States) (US)
- Turner-Fairbank Highway Research Center (US)
Publication Details
- Journal
- Scientific Reports
- Published
- 2026-11-21
- DOI
- https://doi.org/10.1038/s41598-026-80522-0
- Primary Topic
- Fire effects on concrete materials
- Type
- article
- Field-Weighted Citation Impact
- 0.00