Material-efficient 3D phononic crystals: Infill density acoustic performance insensitivity probed by laser plasma sound sources
Phononic crystals and acoustic metamaterials have attracted increasing attention in recent years as they offer precise control over sound propagation, filtering and attenuation. The interest is partially driven by progress in additive manufacturing, which enables fast, cost-effective and accurate fabrication of multiple complex structures, such as acoustic cavities and resonators. This work presents an experimental study regarding the influence of the infill density of additively manufactured phononic crystals on their acoustic characteristics. Specifically, a set of specimens sharing an identical lattice geometry based on air cavities but manufactured with different rectilinear infill densities is fabricated using fused filament fabrication. The samples are acoustically characterized using laser plasma sound sources, a recently developed novel method that enables accurate and spatially unbounded acoustic probing over a wide frequency range. The results show that, under the investigated experimental conditions, variation of the infill density does not measurably affect the spectral position or depth of the acoustic band gaps, while the differences observed in the passband spectral ranges are also negligible. Accordingly, comparable acoustic performance can be achieved using reduced infill density for the investigated phononic crystal geometry fabricated from a rigid polymeric material, resulting in lower material consumption, reduced weight and shorter manufacturing time. Such findings are significant for the commercialization of phononic crystals intended for a variety of sound manipulation applications, such as passive noise reduction by acoustic panels or barriers, development of sound insulation building elements, i.e. walls, selective filtering of acoustic frequencies in industrial environments and room acoustics design.
Authors
- D.T.G. Katerelos (ORCID: https://orcid.org/0000-0002-0834-6132)
- Nikos Aravantinos-Zafiris (ORCID: https://orcid.org/0000-0003-1369-696X)
- M. Tatarakis (ORCID: https://orcid.org/0000-0003-4285-3784)
- K. Kaleris
- N.A. Papadogiannis
- J. Mourjopoulos
- V. Dimitriou
- M. Sigalas
- E. Kaniolakis-Kaloudis
- M. Bakarezos
Institutions
- Computer Technology Institute and Press “DIOPHANTUS” (GR)
- University of Patras (GR)
- Ionian University (GR)
- Mediterranean University (ME)
- Hellenic Mediterranean University (GR)
Publication Details
- Journal
- Applied Acoustics
- Published
- 2026-11-21
- DOI
- https://doi.org/10.1016/j.apacoust.2026.111683
- Primary Topic
- Acoustic Wave Phenomena Research
- Type
- article
- Field-Weighted Citation Impact
- 0.00