Hyphal differentiation and cell wall remodeling in Trametes versicolor underlie a layered architecture in pure mycelium materials
Background: Pure mycelium materials grown at the air-liquid interface are promising leather alternatives, yet they are generally treated as homogeneous sheets of fungal biomass. Because basidiomycetes differentiate their hyphae into generative, skeletal and ligative cell types, the properties of such materials may instead arise from an internal tissue organisation. In this study, cell types produced by the trimitic white-rot fungus Trametes versicolor during Liquid State Surface Fermentation were characterized and the impact of their spatial organisation, mechanics and cell wall composition on the resulting material was analysed. Results: Optic and electron microscopy revealed the mats are not homogeneous but consist of two layers: a dense bottom layer of thin-walled generative hyphae in contact with the liquid medium, and a looser, air-exposed top layer made of thick-walled skeletal hyphae. Both layers had comparable hyphal diameters (2.43 ± 0.42 and 2.33 ± 0.50 µm), but the skeletal hyphae in the mat were roughly half the diameter of their fruiting-body counterparts (5.10 ± 1.05 µm). Untreated mats stress-strain curves displayed sequential failure: brittle fracture of the generative bottom layer followed by ductile failure of the skeletal layer. The two faces also differed in wettability, the top being hydrophobic and highly adhesive and the bottom hydrophilic. Solid-state NMR showed extensive rigid cell wall remodelling between the two cell types: alpha-1,3-glucan accounted for about one third of the rigid polysaccharides in the generative layer but was undetectable in the skeletal layer, which contained approximately 74% beta-1,3-glucan and 26% chitin and was overall more rigid and more lipid-rich. Conclusions: These results show that Trametes versicolor differentiates into a very specific type of skeletal hyphae in liquid state surface fermentation, which involves remodelling of the molecular architecture of the cell wall rather than a simple thickening of it, and that the mechanical and surface behaviour of the material can be traced to that remodelling and to the cellular organisation.
Authors
- Mario Amalfi (ORCID: https://orcid.org/0000-0002-1792-7828)
- Joost Brancart (ORCID: https://orcid.org/0000-0002-1735-1515)
- Antoine Loquet (ORCID: https://orcid.org/0000-0001-7176-7813)
- Sofie Verschraegen (ORCID: https://orcid.org/0000-0002-6164-3662)
- Eveline Peeters (ORCID: https://orcid.org/0000-0001-7423-8714)
- Lode Daelemans (ORCID: https://orcid.org/0000-0001-6214-3785)
- Karen De Clerck (ORCID: https://orcid.org/0000-0002-5650-3075)
- Annah-Ololade Sangosanya Annah-Ololade Sangosanya (ORCID: https://orcid.org/0000-0001-5432-2265)
- Niko Paul Van Den Brande (ORCID: https://orcid.org/0000-0002-5324-6261)
- Agathe Ecoutin
- Phebe Arnauts (ORCID: https://orcid.org/0009-0004-0922-6767)
Institutions
- Meise Botanic Garden (BE)
- Vrije Universiteit Brussel (BE)
- Université de Bordeaux (FR)
Publication Details
- Journal
- bioRxiv (Cold Spring Harbor Laboratory)
- Published
- 2026-11-20
- DOI
- https://doi.org/10.64898/2026.11.19.765702
- Primary Topic
- Fungal Biology and Applications
- Type
- preprint