Stage-specific carbon, thermal and cost analysis of reinforced-concrete wet-wall and high-insulation steel-stud drywall systems

The construction industry requires wall systems that reduce construction- and operation-stage impacts, yet studies often compare wet and dry systems with unequal thermal properties or examine thermal bridges without integrating energy, carbon, and cost. This study applied a stage-specific carbon, thermal, and cost comparison to a reinforced-concrete (RC) wet wall, conventional C-stud drywall, and proposed high-insulation slotted steel-stud drywall using TRISCO (Physibel, Ghent, Belgium), TRNSYS 18, life-cycle inventory data, and 60-year present-value sensitivity. For the evaluated opaque non-load-bearing walls, the proposed system had reported emissions of 225.9 kg CO 2 -eq/m2 from material production through on-site construction, 49.5% below the selected RC wall and a reported 4.1% below conventional drywall (percentage reconciliation is discussed in Section 4.3); on-site construction emissions decreased from 36.0 to 18.0 kg CO 2 -eq/m2. At an equal U-value of 0.170 W/(m2·K), its 240 mm thickness was 38.9% below the 392.5 mm RC wall and 14.3% below the 280 mm conventional drywall. Reported annual heating-and-cooling energy consumption was 72.63 kWh/(m2·yr), 11.1% below the RC operational reference and 8.9% below conventional drywall. Operational emissions calculated using simulation-derived energy use and emission factors provided by the Ministry of Environment, Republic of Korea, on a 2021 CO 2 -equivalent basis, were reported as 13.5 kg CO 2 -eq/(m2·yr), compared with 29.5 for RC and 16.6 for conventional drywall. Across real discount rates of 0–5% under constant 2023 real prices, the proposed system’s scenario-based 60-year present-value cost was 13.3–13.7% below the RC wall. Wet-to-dry substitution was the primary upfront-carbon measure; stud optimization provided a smaller additional improvement. The assessment covers climate change only. Operational normalization and energy-to-carbon/cost links remain unverified; maintenance and replacement are excluded from the cost scenario. Conclusions remain configuration-specific and do not establish a reconciled whole-life benefit or structural-safety certification.

Authors

Institutions

Publication Details

Journal
Sustainable Energy Technologies and Assessments
Published
2026-11-21
DOI
https://doi.org/10.1016/j.seta.2026.105600
Primary Topic
Environmental Impact and Sustainability
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Stage-specific carbon, thermal and cost analysis of reinforced-concrete wet-wall and high-insulation steel-stud drywall systems

Kwonye Kim, Yujin Nam, Jae‐Weon Jeong, Youngsik Kwon et al.
Sustainable Energy Technologies and Assessments
Environmental Impact and Sustainability
article

Stage-specific carbon, thermal and cost analysis of reinforced-concrete wet-wall and high-insulation steel-stud drywall systems

Kwonye Kim, Yujin Nam, Jae‐Weon Jeong, Youngsik Kwon, Youngdong Yu
article en

Abstract

The construction industry requires wall systems that reduce construction- and operation-stage impacts, yet studies often compare wet and dry systems with unequal thermal properties or examine thermal bridges without integrating energy, carbon, and cost. This study applied a stage-specific carbon, thermal, and cost comparison to a reinforced-concrete (RC) wet wall, conventional C-stud drywall, and proposed high-insulation slotted steel-stud drywall using TRISCO (Physibel, Ghent, Belgium), TRNSYS 18, life-cycle inventory data, and 60-year present-value sensitivity. For the evaluated opaque non-load-bearing walls, the proposed system had reported emissions of 225.9 kg CO 2 -eq/m2 from material production through on-site construction, 49.5% below the selected RC wall and a reported 4.1% below conventional drywall (percentage reconciliation is discussed in Section 4.3); on-site construction emissions decreased from 36.0 to 18.0 kg CO 2 -eq/m2. At an equal U-value of 0.170 W/(m2·K), its 240 mm thickness was 38.9% below the 392.5 mm RC wall and 14.3% below the 280 mm conventional drywall. Reported annual heating-and-cooling energy consumption was 72.63 kWh/(m2·yr), 11.1% below the RC operational reference and 8.9% below conventional drywall. Operational emissions calculated using simulation-derived energy use and emission factors provided by the Ministry of Environment, Republic of Korea, on a 2021 CO 2 -equivalent basis, were reported as 13.5 kg CO 2 -eq/(m2·yr), compared with 29.5 for RC and 16.6 for conventional drywall. Across real discount rates of 0–5% under constant 2023 real prices, the proposed system’s scenario-based 60-year present-value cost was 13.3–13.7% below the RC wall. Wet-to-dry substitution was the primary upfront-carbon measure; stud optimization provided a smaller additional improvement. The assessment covers climate change only. Operational normalization and energy-to-carbon/cost links remain unverified; maintenance and replacement are excluded from the cost scenario. Conclusions remain configuration-specific and do not establish a reconciled whole-life benefit or structural-safety certification.

Sustainable Energy Technologies and AssessmentsVol. 96
Pohang Iron and Steel (South Korea) (KR), Hanyang University (KR), Pusan National University (KR)
Environmental Impact and Sustainability
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon