Characterizing the Influence of Alloy Compositional Variation on the Wetting Behavior and Surface Tension of Liquid Al 7xxx Alloys

This study systematically investigates the wettability and surface tension of seven calculation of phase diagrams (CALPHAD)-designed Al 7xxx alloys developed for laser powder bed fusion (LPBF). The alloys comprised the following: Al7075, Al7075–1V, Al7075–1V–1Mg, Al7075–1V–2Mg, Al7075–1V–1Ti, Al7075–1V–1Ti–1Mg, and Al7075–1V–1Ti–2Mg for Alloys 1 to 7, respectively (additions in wt pct). Sessile drop experiments were conducted on alumina substrates under argon from 923 K to 1523 K. Surface tension was also evaluated using a CALPHAD-coupled modified Guggenheim formulation over 932 K to 1673 K and a CALPHAD-coupled multicomponent Butler model over 932 K to 1523 K. The experimental results revealed that contact angles decreased with temperature for all alloys, with Alloy 1 remaining nonwetting up to 1273 K before wetting improved markedly. The experimental surface tension ranged from 718.87 to 1079.80 mN m −1 , whereas the CALPHAD predictions (modified Guggenheim formulation) ranged from 746.07 to 843.71 mN m −1 . Alloy 1 exhibited an experimental nonmonotonic response, increasing from 766.74 mN m −1 at 923 K to 884.85 mN m −1 at 1273 K before decreasing to 811.08 mN m −1 at 1523 K. Fitted experimental temperature coefficients were positive for Alloys 4 and 7 and negative for Alloys 2, 3, 5, and 6. In contrast, both thermodynamic approaches predicted negative temperature coefficients for all seven alloys. Butler calculations showed strong Mg surface enrichment and decreasing equilibrium surface tension with increasing Mg content, whereas V and Ti were strongly surface depleted. Post-test energy-dispersive spectroscopy revealed oxygen-rich surface regions and substantial Mg and Zn compositional changes. Overall, equilibrium alloy composition and surface segregation explain part of the surface tension response, whereas oxygen-related surface modification and possible elemental volatilization may contribute to the remaining experimental behavior. These results support the heat transfer–fluid flow modeling of the melt pool dynamics of LPBF-processed aluminum alloys.

Authors

Institutions

Publication Details

Journal
Metallurgical and Materials Transactions A
Published
2026-11-21
DOI
https://doi.org/10.1007/s11661-026-08432-4
Primary Topic
Thermodynamic and Structural Properties of Metals and Alloys
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Characterizing the Influence of Alloy Compositional Variation on the Wetting Behavior and Surface Tension of Liquid Al 7xxx Alloys

Chukwudalu Uchenna Uba, Jonathan Richard Raush
Metallurgical and Materials Transactions A
Thermodynamic and Structural Properties of Metals and Alloys
article

Characterizing the Influence of Alloy Compositional Variation on the Wetting Behavior and Surface Tension of Liquid Al 7xxx Alloys

Chukwudalu Uchenna Uba, Jonathan Richard Raush
article en

Abstract

This study systematically investigates the wettability and surface tension of seven calculation of phase diagrams (CALPHAD)-designed Al 7xxx alloys developed for laser powder bed fusion (LPBF). The alloys comprised the following: Al7075, Al7075–1V, Al7075–1V–1Mg, Al7075–1V–2Mg, Al7075–1V–1Ti, Al7075–1V–1Ti–1Mg, and Al7075–1V–1Ti–2Mg for Alloys 1 to 7, respectively (additions in wt pct). Sessile drop experiments were conducted on alumina substrates under argon from 923 K to 1523 K. Surface tension was also evaluated using a CALPHAD-coupled modified Guggenheim formulation over 932 K to 1673 K and a CALPHAD-coupled multicomponent Butler model over 932 K to 1523 K. The experimental results revealed that contact angles decreased with temperature for all alloys, with Alloy 1 remaining nonwetting up to 1273 K before wetting improved markedly. The experimental surface tension ranged from 718.87 to 1079.80 mN m −1 , whereas the CALPHAD predictions (modified Guggenheim formulation) ranged from 746.07 to 843.71 mN m −1 . Alloy 1 exhibited an experimental nonmonotonic response, increasing from 766.74 mN m −1 at 923 K to 884.85 mN m −1 at 1273 K before decreasing to 811.08 mN m −1 at 1523 K. Fitted experimental temperature coefficients were positive for Alloys 4 and 7 and negative for Alloys 2, 3, 5, and 6. In contrast, both thermodynamic approaches predicted negative temperature coefficients for all seven alloys. Butler calculations showed strong Mg surface enrichment and decreasing equilibrium surface tension with increasing Mg content, whereas V and Ti were strongly surface depleted. Post-test energy-dispersive spectroscopy revealed oxygen-rich surface regions and substantial Mg and Zn compositional changes. Overall, equilibrium alloy composition and surface segregation explain part of the surface tension response, whereas oxygen-related surface modification and possible elemental volatilization may contribute to the remaining experimental behavior. These results support the heat transfer–fluid flow modeling of the melt pool dynamics of LPBF-processed aluminum alloys.

Metallurgical and Materials Transactions A
University of Louisiana at Lafayette (US)
Thermodynamic and Structural Properties of Metals and Alloys
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon