Performance evaluation of conventional and hybrid nanofluids for heat transfer enhancement in circular microchannel heat exchangers

The increasing demand for compact and efficient thermal-management systems has stimulated interest in nanofluids as advanced working fluids for microchannel heat exchangers. In the present study, the thermal and hydraulic performance of a circular counter-flow microchannel heat exchanger using water, Al₂O₃–water, Cu–H 2 O, Graphene–Al₂O₃/ H 2 O, and MXene–Al₂O₃/ H 2 O nanofluids was numerically investigated. Since the present study is entirely numerical, the nanofluids were modeled as homogeneous, adequately dispersed, and stable, without experimental stability characterization such as zeta-potential, sedimentation, or TEM analysis. The effects of Reynolds number (200–1000) and nanoparticle volume fraction (0–5 vol%) on the Nusselt number, convective heat-transfer coefficient, pressure drop, friction factor, pumping power, and thermal–hydraulic performance factor (THPF) were systematically evaluated. The results demonstrate that the incorporation of nanoparticles enhances heat-transfer performance, with hybrid nanofluids exhibiting greater enhancement than conventional nanofluids. At the optimum investigated condition, the Nusselt number increased by 12.87%, 18.81%, 28.71%, and 35.64% for Al₂O₃– H 2 O, Cu– H 2 O, Graphene–Al₂O₃/ H 2 O, and MXene–Al₂O₃/ H 2 O, respectively, relative to water. The corresponding convective heat-transfer coefficient increased by 57.0%, 71.0%, 91.0%, and 105.0%, respectively, with MXene–Al₂O₃/ H 2 O exhibiting the highest thermal enhancement. The maximum pressure drop and friction factor for MXene–Al 2 O₃/ H 2 O increased by 55.7% and 22.8%, respectively, in comparison to water, but this improvement was accompanied by increased hydraulic resistance. With a maximum improvement of 22.9% for MXene–Al 2 O₃/ H 2 O, the THPF remained above unity throughout the investigated range despite these penalties, suggesting that the thermal benefit outweighed the additional pumping requirement. Additionally, empirical correlations with coefficients of determination greater than 0.99 were created from the numerical results for forecasting the thermal and hydraulic performance parameters within the examined operating range. Among the fluids examined, MXene–Al 2 O₃/water showed the best overall thermal–hydraulic performance, suggesting that it could be further studied as a working fluid in compact microchannel heat exchangers.

Authors

Institutions

Publication Details

Journal
Next Nanotechnology
Published
2026-11-21
DOI
https://doi.org/10.1016/j.nxnano.2026.100945
Primary Topic
Nanofluid Flow and Heat Transfer
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Performance evaluation of conventional and hybrid nanofluids for heat transfer enhancement in circular microchannel heat exchangers

Baburao Gaddala, Yogesh Agrawal, Niraj Balkrishna Dole, Sagar Kailas Sonawane et al.
Next Nanotechnology
Nanofluid Flow and Heat Transfer
article

Performance evaluation of conventional and hybrid nanofluids for heat transfer enhancement in circular microchannel heat exchangers

Baburao Gaddala, Yogesh Agrawal, Niraj Balkrishna Dole, Sagar Kailas Sonawane, Vinod L, Ravi Kant Singh, Ajit Kumar Varma, Kamlesh Mohanlal Chhajed
article en

Abstract

The increasing demand for compact and efficient thermal-management systems has stimulated interest in nanofluids as advanced working fluids for microchannel heat exchangers. In the present study, the thermal and hydraulic performance of a circular counter-flow microchannel heat exchanger using water, Al₂O₃–water, Cu–H 2 O, Graphene–Al₂O₃/ H 2 O, and MXene–Al₂O₃/ H 2 O nanofluids was numerically investigated. Since the present study is entirely numerical, the nanofluids were modeled as homogeneous, adequately dispersed, and stable, without experimental stability characterization such as zeta-potential, sedimentation, or TEM analysis. The effects of Reynolds number (200–1000) and nanoparticle volume fraction (0–5 vol%) on the Nusselt number, convective heat-transfer coefficient, pressure drop, friction factor, pumping power, and thermal–hydraulic performance factor (THPF) were systematically evaluated. The results demonstrate that the incorporation of nanoparticles enhances heat-transfer performance, with hybrid nanofluids exhibiting greater enhancement than conventional nanofluids. At the optimum investigated condition, the Nusselt number increased by 12.87%, 18.81%, 28.71%, and 35.64% for Al₂O₃– H 2 O, Cu– H 2 O, Graphene–Al₂O₃/ H 2 O, and MXene–Al₂O₃/ H 2 O, respectively, relative to water. The corresponding convective heat-transfer coefficient increased by 57.0%, 71.0%, 91.0%, and 105.0%, respectively, with MXene–Al₂O₃/ H 2 O exhibiting the highest thermal enhancement. The maximum pressure drop and friction factor for MXene–Al 2 O₃/ H 2 O increased by 55.7% and 22.8%, respectively, in comparison to water, but this improvement was accompanied by increased hydraulic resistance. With a maximum improvement of 22.9% for MXene–Al 2 O₃/ H 2 O, the THPF remained above unity throughout the investigated range despite these penalties, suggesting that the thermal benefit outweighed the additional pumping requirement. Additionally, empirical correlations with coefficients of determination greater than 0.99 were created from the numerical results for forecasting the thermal and hydraulic performance parameters within the examined operating range. Among the fluids examined, MXene–Al 2 O₃/water showed the best overall thermal–hydraulic performance, suggesting that it could be further studied as a working fluid in compact microchannel heat exchangers.

Next NanotechnologyVol. 10
Nitte University (IN), Narsee Monjee Institute of Management Studies (IN), Chaudhary Charan Singh University (IN), Indian Numismatic, Historical and Cultural Research Foundation (IN), MIT Art, Design and Technology University (IN), Sandip Institute of Technology & Research Centre (IN), Bahrain Polytechnic (BH)
Nanofluid Flow and Heat Transfer
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon