Experimental investigation of chute slope effects on energy dissipation over rough beds
In this study, the effect of chute slope on energy dissipation has been investigated. For this purpose, a general non-dimensional relationship was developed. Then, a series of experimental tests were conducted with physical models using six different bed slopes (16.4, 20.6°, 22.6°, 25°, 28.7°, and 35°) and two different uniform roughness heights (3.38 and 38.1 mm). A total of 120 tests were conducted with flow discharges ranging from 4 to 45 ls−1. Results show that, compared with the smooth bed, nearly 7–51% of the flow energy was dissipated on the roughened bed chute. Energy dissipation per unit length of the chute and the ratio of energy dissipation to upstream energy increased by 80% and 95%, respectively. Maximum energy dissipation occurred at a slope of 16.4° within the tested range of slopes, and the minimum energy dissipation occurred at 35°. A relationship was developed to predict energy dissipation for this type of chute, and the results were compared with those of previous works.
Authors
- Farzin Salmasi (ORCID: https://orcid.org/0000-0002-1627-8598)
- Fereshteh Beiranvand
- John Abraham (ORCID: https://orcid.org/0000-0002-3818-8681)
Institutions
- Khazar University (AZ)
- University of St. Thomas - Minnesota (US)
- University of Tabriz (IR)
Publication Details
- Journal
- ISH Journal of Hydraulic Engineering
- Published
- 2026-11-21
- DOI
- https://doi.org/10.1080/09715010.2026.2766559
- Primary Topic
- Hydraulic flow and structures
- Type
- article
- Field-Weighted Citation Impact
- 0.00