Biomimetic Hybrid–Twisted Layered Structure for Enhancing the Multi–Dimensional Properties of Composite Rods
Pultruded carbon fiber composite rods exhibit outstanding axial tensile performance but suffer from poor and unbalanced off–axis mechanical properties, which severely limits their engineering applications. Inspired by natural Bouligand, gradual helical structures and hierarchical assembly principles, this work innovatively proposes a biomimetic hybrid–twisted layered structure for composite rods. Rods with varied inner/outer twist configurations were fabricated via pultrusion. Quasi–static mechanical tests (tension, flexure, shear), low–velocity impact characterization and dynamic mechanical analysis (DMA) were studied, together with quantitative measurements of fiber volume fraction and porosity. The results demonstrate that the optimized CFB–60T/30T sample achieves synergistic enhancement in tensile, flexural, shear and impact performances. The layered twist gradient design induces crack deflection and tension–torsion coupling, balances stiffness and toughness, and mitigates premature catastrophic failure. This study clarifies the structure–property relationship between biomimetic hybrid–twisted structure and multi–dimensional mechanical responses. It provides a feasible structural strategy, theoretical framework and experimental basis for the directional regulation of the multi–dimensional performance of pultruded composite rods according to the engineering load–bearing requirements.
Authors
- Yueyue Wang (ORCID: https://orcid.org/0009-0001-9267-9537)
- Wang Kun (ORCID: https://orcid.org/0009-0007-2334-4614)
- Nanliang Chen
Institutions
- Donghua University (CN)
Publication Details
- Journal
- Polymer Composites
- Published
- 2026-11-20
- DOI
- https://doi.org/10.1002/pc.71899
- Primary Topic
- Mechanical Behavior of Composites
- Type
- article
- Field-Weighted Citation Impact
- 0.00