Preparation, structural characterization, and mechanical properties of chitosan foams reinforced with graphene and graphene oxide

Chitosan (CS) is a promising biopolymer for the development of porous materials, although the limited mechanical resistance of CS-based foams can restrict their practical applications. This study investigated the preparation, structural characteristics, and mechanical properties of CS foams reinforced with graphene (G) or graphene oxide (GO), with and without glutaraldehyde crosslinking and cetyltrimethylammonium bromide (CTAB) addition. Eight formulations were produced by mechanical air incorporation/foaming method followed by conventional oven drying. The materials were characterized by dynamic light scattering (DLS), scanning electron microscopy (SEM), X-ray diffraction (XRD), attenuated total reflectance Fourier-transform infrared spectroscopy (ATR-FTIR), apparent density, compression testing, and water uptake measurements. DLS analysis indicated smaller apparent hydrodynamic sizes for GO than for G dispersions, while SEM revealed a porous morphology with more defined pores and thicker walls compared in crosslinked foams. XRD analysis indicated reduced crystalline organization in the foams compared with pure CS. Apparent densities ranged from 38.6 to 50.6 kg·m -3 . The crosslinked GO-containing formulation (CS-R-GO) exhibited the highest mean compressive stress (57.7 kPa), approximately 3.1 times that of unmodified CS foam, and the highest water uptake after 1 h of immersion (3929%). These findings demonstrate the feasibility of producing lightweight CS-based foams without freeze-drying, also highlighting the combined use of GO reinforcement and glutaraldehyde crosslinking as a promising formulation strategy for improving the dry compressive mechanical resistance.

Authors

Publication Details

Journal
Environmental Science and Pollution Research
Published
2026-11-21
DOI
https://doi.org/10.1007/s11356-026-38439-8
Primary Topic
Polymer Foaming and Composites
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Preparation, structural characterization, and mechanical properties of chitosan foams reinforced with graphene and graphene oxide

Glaucia R. M. Burin, Helton José Alves, Áquila de Oliveira Alencar
Environmental Science and Pollution Research
Polymer Foaming and Composites
article

Preparation, structural characterization, and mechanical properties of chitosan foams reinforced with graphene and graphene oxide

Glaucia R. M. Burin, Helton José Alves, Áquila de Oliveira Alencar
article en

Abstract

Chitosan (CS) is a promising biopolymer for the development of porous materials, although the limited mechanical resistance of CS-based foams can restrict their practical applications. This study investigated the preparation, structural characteristics, and mechanical properties of CS foams reinforced with graphene (G) or graphene oxide (GO), with and without glutaraldehyde crosslinking and cetyltrimethylammonium bromide (CTAB) addition. Eight formulations were produced by mechanical air incorporation/foaming method followed by conventional oven drying. The materials were characterized by dynamic light scattering (DLS), scanning electron microscopy (SEM), X-ray diffraction (XRD), attenuated total reflectance Fourier-transform infrared spectroscopy (ATR-FTIR), apparent density, compression testing, and water uptake measurements. DLS analysis indicated smaller apparent hydrodynamic sizes for GO than for G dispersions, while SEM revealed a porous morphology with more defined pores and thicker walls compared in crosslinked foams. XRD analysis indicated reduced crystalline organization in the foams compared with pure CS. Apparent densities ranged from 38.6 to 50.6 kg·m -3 . The crosslinked GO-containing formulation (CS-R-GO) exhibited the highest mean compressive stress (57.7 kPa), approximately 3.1 times that of unmodified CS foam, and the highest water uptake after 1 h of immersion (3929%). These findings demonstrate the feasibility of producing lightweight CS-based foams without freeze-drying, also highlighting the combined use of GO reinforcement and glutaraldehyde crosslinking as a promising formulation strategy for improving the dry compressive mechanical resistance.

Environmental Science and Pollution Research
Polymer Foaming and Composites
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon
Preparation, structural characterization, and mechanical properties of chitosan foams reinforced with graphene and graphene oxide — Glaucia R. M. Burin, Helton José Alves, et al. · Environmental Science and Pollution Research (2026) | TGRS Research Map | TGRS