Foaming and crystallization behaviors of natural ramie fiber reinforced poly(lactic acid) composites
The microcellular foams based on biocompatible and biodegradable polylactic acid (PLA) produced by supercritical fluids can improve the toughness, achieve lightweighting, and reduce production cost. This study proposes an eco-friendly approach by incorporating ramie fiber (RF) with PLA to enhance the foaming ability without compromising the biodegradable nature. In this work, the influence of foaming pressure and temperature in one-step autoclave press relief process on the foaming and crystallization behaviors of composite foams are systematically researched, and the influencing laws and mechanisms are clarified. Experimental results indicate that, the maximum expansion ratio can be reached 10.43, when using processing temperature of 112°C, pressure of 15 MPa, and foaming time of 40 min, respectively. The thermal performance of RF-reinforced PLA composite foam is significantly influenced by the foaming temperature and CO 2 plasticizing effect. PLA/RF foam manufactured at low foaming temperature (100–115°C) and low saturation pressure (10–17.5 MPa) shows double peaks of melting, and in contrast high foaming temperature (120°C) and high saturation pressure (20 MPa) assigns a single peak of melting. This study provides an effective autoclave foaming method using physical agent CO 2 for preparing a green natural fiber composite foam, with potential application value in packaging, automotive/aircraft interior decoration, building decoration, and other fields.
Authors
- Yanpeng Bao
- Yingxiao Wang (ORCID: https://orcid.org/0000-0003-0265-326X)
- Jun Lin (ORCID: https://orcid.org/0000-0002-7172-7122)
- 张海明
- Guilong Wang
- Jiao Li
- Xiangqian Xie
- Jinjie Lu
- Yachao Guo
- Chuanying Wang
Institutions
- Shandong University (CN)
- Genertec Shenyang Machine Tool Co., Ltd. (China) (CN)
- Shandong Jianzhu University (CN)
Publication Details
- Journal
- Journal of Reinforced Plastics and Composites
- Published
- 2026-11-21
- DOI
- https://doi.org/10.1177/07316844261505396
- Primary Topic
- Polymer Foaming and Composites
- Type
- article
- Field-Weighted Citation Impact
- 0.00