Pineapple leaf fibre/epoxy laminates from agricultural waste for sustainable composite manufacturing: Effect of fibre orientation and water immersion
This study investigates the mechanical and water immersion properties of pineapple leaf fiber epoxy laminated composites (PALF) with fibers oriented at 0° and 90°. PALF, a natural fiber extracted from pineapple leaves typically an agricultural waste comprise of holocellulose (70–82%), lignin (5–12%), and ash (1.1%) and shows promise as a sustainable reinforcement material. Laminates were prepared by hand lay-up and compression molding, then tested for tensile and flexural properties per ASTM standards. Dry 0° fiber composites exhibited a maximum tensile load of 2400 N with 4.92% elongation. For 90° orientation, the maximum tensile load was 1190 N with 3.46% elongation. Composite immersion in various water such as sea, tap and distilled water results in decrement its mechanical strength and exhibits both Fickian and non-Fickian absorption kinetics during immersion. Specimens immersed in distilled water exhibits least degradation and higher reduction in strength was above for sample immersed in sea water. This research outlines PL fiber reinforced epoxy composite is the candidate eco-friendly material but it is sensitive towards moisture conditions.
Authors
- Vasumathi Manivachakan (ORCID: https://orcid.org/0000-0003-2515-2871)
- V. Kavimani (ORCID: https://orcid.org/0000-0003-2894-4137)
- Rudra Mahadev
- S. Rashia Begum
- M. Saravana Kumar
Institutions
- National Taipei University of Technology (TW)
- Anna University, Chennai (IN)
- Karpagam Academy of Higher Education (IN)
- Saveetha University (IN)
Publication Details
- Journal
- Next Materials
- Published
- 2026-11-21
- DOI
- https://doi.org/10.1016/j.nxmate.2026.104083
- Primary Topic
- Natural Fiber Reinforced Composites
- Type
- article
- Field-Weighted Citation Impact
- 0.00