NUMERICAL CALCULATION OF THE DIFFSUION PROCESS OF MANGANESE AND SULFUR IN SILICON
The paper presents the results of a numerical calculation of the diffusion process of manganese and sulfur in silicon, whereas the duration of diffusion and temperature regime could be set flexibly in advance of the calculation process. For the case of "first sulfur-and then-manganese" diffusion, the pattern was considered for diffusion temperatures of 12500С for sulfur and 12000С for manganese, respectively. Based on the calculation results, it could be assumed that down to depths of 140 micron, the optimal diffusion time of sulfur that ensure concentrations of sulfur and manganese impurity atoms equate across the bulk, appears to be from 3 to 5 hours. A surface image of Si<Mn,S> sample did not reveal any formation of clusters and precipitates, which is indicative of an increase in the solubility of manganese impurities in the presence of sulfur impurities in the bulk of single-crystal silicon. Thus, it can be assumed that during heat treatment of silicon crystals that were pre-diffusion-doped with sulfur and manganese in a certain temperature range, intense interaction between these impurity centers occurs, accompanied by electrical neutralization of both impurity centers.
Authors
- Abdulaziz Mavlyanov
- Sharifa Utamuradova
- Zebo Mavlonova
- Fayzulla Yuldoshev
Institutions
- Tashkent State Technical University named after Islam Karimov (UZ)
- National University of Uzbekistan (UZ)
Publication Details
- Journal
- Zenodo (CERN European Organization for Nuclear Research)
- Published
- 2026-11-21
- DOI
- https://doi.org/10.5281/zenodo.24423237
- Primary Topic
- Semiconductor materials and interfaces
- Type
- article
- Field-Weighted Citation Impact
- 0.00