Microstructural regulation enables strength-ductility synergy and superior high-temperature performance in additively manufactured ECY768 cobalt-based superalloy
ECY768 is a promising cobalt-based superalloy for hot-section components in aerospace and energy applications, yet its fabrication process by laser powder bed fusion (LPBF) remains insufficiently explored. This study investigates the microstructure and tensile behavior of LPBF ECY768 alloy in the as-built (AB), solution treated (ST), direct aging treated (AT), and solution aging treated (SAT) conditions. Results indicate that the highly dense AB alloy shows a mixed columnar-equiaxed grain structure containing cellular dendritic sub-grain. MC-type carbides and M 23 C 6 -type carbides are distributed along cellular boundaries. Although the AB alloy has a certain of anisotropy in tensile properties, it achieves substantially higher room temperature strength and ductility than cast cobalt-based superalloy, owing to the synergistic strengthening of the cellular dislocation networks and carbides. ST induces recovery and recrystallization, causing grain equiaxialization and clear reductions in carbide content and dislocation density. Consequently, strength decreases but elongation increases by more than 20%. AT preserves the original grain morphology but coarsens carbides and raises their fraction, thereby enhancing strength at the expense of ductility. SAT produces recrystallized grains with moderate carbide fraction and dislocation density, realizing a favorable strength-ductility balance with anisotropy below 5%. High-temperature tensile testing at 540°C, 750°C, and 900°C reveals a continuous reduction in strength, whereas elongation exhibits an initial increase followed by a decrease for both AB and SAT conditions. Correspondingly, the fracture modes evolve from transgranular to mixed transgranular-intergranular and to predominantly intergranular. Overall, the LPBF ECY768 alloy demonstrates high strength and appreciable ductility across a wide temperature range, highlighting its engineering potential.
Authors
- Kaiwen Wei (ORCID: https://orcid.org/0000-0002-3376-1469)
- 刘浩博 Liu Haobo
- Runsen Zhou
- Qiao Zhong (ORCID: https://orcid.org/0000-0002-4829-2204)
- Xiaoze Yue (ORCID: https://orcid.org/0000-0003-4405-1953)
- Yisong Wang
- Xiaoyan Zeng
- Runsheng Li
- Li Meng
Institutions
- Hong Kong Polytechnic University (HK)
- Beijing Jingshida Electromechanical Equipment Research Institute (CN)
- Wuhan National Laboratory for Optoelectronics (CN)
- Huazhong University of Science and Technology (CN)
Publication Details
- Journal
- Smart Materials in Manufacturing
- Published
- 2026-11-21
- DOI
- https://doi.org/10.1016/j.smmf.2026.100173
- Primary Topic
- High Temperature Alloys and Creep
- Type
- article
- Field-Weighted Citation Impact
- 0.00