Sustainable biomass-inherited penta-heteroatom self-doped porous carbon from Terminalia catappa leaf waste engineered with graphene/MWCNT for lithium-ion battery anodes

Sustainable anode materials that combine low-cost biomass precursors with efficient lithium-storage characteristics are attractive for next-generation lithium-ion batteries. Herein, Terminalia catappa leaf waste was upcycled into biomass-inherited penta-heteroatom self-doped porous activated carbon (TCAC) containing O, Si, Mg, Ca, and Cl, followed by structural and transport engineering using graphene and multi-walled carbon nanotubes (MWCNTs). The TCAC framework serves as the primary Li-storage matrix, while graphene/MWCNTs provide complementary conductive and structural pathways. The materials were prepared through KOH-assisted activation, incorporation of a total of 3 wt% graphene/MWCNT, and subsequent N₂-assisted thermal treatment at 900 °C. Among the investigated compositions, TCAC-G1M2 (1 wt% graphene and 2 wt% MWCNT) exhibited the most developed porous structure, with a specific surface area of 454.80 m² g⁻¹ and a total pore volume of 0.28 cm³ g⁻¹ , providing an accessible micro/mesoporous framework for electrolyte penetration and Li⁺ transport. In Li half-cells operated over 0.02–3.0 V, TCAC-G1M2 delivered 279.73 mAh g⁻¹ at 0.1 C and retained 32.77 mAh g⁻¹ at 10 C, compared with 97.50 and 6.88 mAh g⁻¹ , respectively, for pristine TCAC. Electrochemical impedance analysis further revealed that TCAC-G1M2 maintained relatively low charge-transfer resistance (247.37 Ω) and a comparatively high Li⁺ diffusion coefficient (1.13 × 10⁻¹⁴ cm² s⁻¹) among the modified electrodes. These results demonstrate that the electrochemical performance originates primarily from the porous and defect-rich TCAC framework, while graphene/MWCNT engineering enhances its electronic connectivity and high-rate utilization. This work provides a sustainable route for converting T. catappa leaf waste into functional porous-carbon anodes for lithium-ion batteries.

Authors

Institutions

Publication Details

Journal
Next Materials
Published
2026-11-21
DOI
https://doi.org/10.1016/j.nxmate.2026.104031
Primary Topic
Advancements in Battery Materials
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Sustainable biomass-inherited penta-heteroatom self-doped porous carbon from Terminalia catappa leaf waste engineered with graphene/MWCNT for lithium-ion battery anodes

Isnanda Nuriskasari, Bambang Priyono, Muhammad Hilmy Alfaruqi, Vita Astini et al.
Next Materials
Advancements in Battery Materials
article

Sustainable biomass-inherited penta-heteroatom self-doped porous carbon from Terminalia catappa leaf waste engineered with graphene/MWCNT for lithium-ion battery anodes

Isnanda Nuriskasari, Bambang Priyono, Muhammad Hilmy Alfaruqi, Vita Astini, Anne Zulfia Syahrial, Aditya Eka Nurfitrah
article en

Abstract

Sustainable anode materials that combine low-cost biomass precursors with efficient lithium-storage characteristics are attractive for next-generation lithium-ion batteries. Herein, Terminalia catappa leaf waste was upcycled into biomass-inherited penta-heteroatom self-doped porous activated carbon (TCAC) containing O, Si, Mg, Ca, and Cl, followed by structural and transport engineering using graphene and multi-walled carbon nanotubes (MWCNTs). The TCAC framework serves as the primary Li-storage matrix, while graphene/MWCNTs provide complementary conductive and structural pathways. The materials were prepared through KOH-assisted activation, incorporation of a total of 3 wt% graphene/MWCNT, and subsequent N₂-assisted thermal treatment at 900 °C. Among the investigated compositions, TCAC-G1M2 (1 wt% graphene and 2 wt% MWCNT) exhibited the most developed porous structure, with a specific surface area of 454.80 m² g⁻¹ and a total pore volume of 0.28 cm³ g⁻¹ , providing an accessible micro/mesoporous framework for electrolyte penetration and Li⁺ transport. In Li half-cells operated over 0.02–3.0 V, TCAC-G1M2 delivered 279.73 mAh g⁻¹ at 0.1 C and retained 32.77 mAh g⁻¹ at 10 C, compared with 97.50 and 6.88 mAh g⁻¹ , respectively, for pristine TCAC. Electrochemical impedance analysis further revealed that TCAC-G1M2 maintained relatively low charge-transfer resistance (247.37 Ω) and a comparatively high Li⁺ diffusion coefficient (1.13 × 10⁻¹⁴ cm² s⁻¹) among the modified electrodes. These results demonstrate that the electrochemical performance originates primarily from the porous and defect-rich TCAC framework, while graphene/MWCNT engineering enhances its electronic connectivity and high-rate utilization. This work provides a sustainable route for converting T. catappa leaf waste into functional porous-carbon anodes for lithium-ion batteries.

Next MaterialsVol. 14
Chonnam National University (KR), Jakarta State Polytechnic (ID), University of Indonesia (ID), Universitas Sembilanbelas November Kolaka (ID)
Advancements in Battery Materials
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon