Lignin-Based Adhesives for Wood-Based Panels: Bonding Pathways, Panel Performance, Sustainability Assessment and Industrial Readiness
Purpose of Review Lignin is an abundant renewable aromatic polymer with considerable potential to reduce the dependence of wood-based panels on fossil-derived adhesives. This review, focused on literature published between 2019 and 2026, examines how technical lignin characteristics, modification strategies and bonding mechanisms influence the manufacture and performance of particleboard, fibreboard, oriented strand board, plywood and panels produced from agricultural lignocellulosic residues. Particular attention is given to the translation of adhesive chemistry into panel-level performance, emissions, process compatibility, sustainability and industrial readiness. Recent Findings Lignin can contribute to panel bonding through partial substitution in phenol–formaldehyde and urea–formaldehyde resins, hybrid crosslinking, formaldehyde-free adhesive systems, direct addition to lignocellulosic furnish and native self-bonding. Moderate lignin substitution and hybrid systems currently provide the most consistent balance between renewable content, curing behaviour, mechanical performance and dimensional stability. Chemical activation, purification and fractionation can improve lignin reactivity and permit higher substitution levels, but also increase processing complexity, energy use and cost. Lignosulfonate-rich and binderless systems can produce panels with satisfactory mechanical properties, although moisture resistance, binder loading, pretreatment severity and pressing time frequently remain limiting factors. Reduced formaldehyde release is commonly reported, but complete volatile-organic-compound profiles and industrial-scale validation remain scarce. Environmental assessments further show that renewable lignin content alone does not guarantee lower impacts because lignin recovery, modification, co-reactants and panel processing can dominate the overall profile. Summary Lignin has progressed from a potential phenol substitute to a versatile platform for several panel-binding strategies. Near-term industrial adoption is most likely through moderate substitution and hybrid formulations compatible with existing production lines. Further advances to reach industrial implementation require performance-based lignin specifications, realistic pressing conditions, improved moisture durability, pilot and factory trials, and integrated life-cycle and techno-economic assessment of functionally equivalent panels.
Authors
- Patrycja Hochmańska (ORCID: https://orcid.org/0000-0002-5524-6564)
- Dominika Janiszewska (ORCID: https://orcid.org/0000-0002-9792-8459)
- Adam Olszewski (ORCID: https://orcid.org/0000-0002-6866-4933)
Institutions
- Gdańsk University of Technology (PL)
- Łukasiewicz Research Network - Poznań Institute of Technology (PL)
Publication Details
- Journal
- Current Forestry Reports
- Published
- 2026-11-21
- DOI
- https://doi.org/10.1007/s40725-026-00297-5
- Primary Topic
- Lignin and Wood Chemistry
- Type
- article
- Field-Weighted Citation Impact
- 0.00