Rancang Bangun Mesin Pencacah Sampah Sayuran Berbasis Programmable Logic Controller Untuk Penanganan Limbah Pasar Stasiun Kabupaten Ponorogo
Vegetable waste generated from market activities requires appropriate processing technology to improve shredding efficiency and reduce manual handling. This study aimed to design and develop a vegetable waste shredding machine based on an Omron CP1E Programmable Logic Controller (PLC) with rotational speed control using a Variable Frequency Drive (VFD), and to evaluate its performance during the shredding process. An experimental method was employed through mechanical design, control system design, assembly, and machine performance testing. The system uses a 0.5 HP three-phase induction motor, a VFD for motor frequency and speed control, an Omron CP1E PLC for automatic control, and a PZEM-022 for monitoring electrical parameters. The control system is equipped with a Thermal Overload Relay (TOR) protection and an auto-reverse mechanism to overcome overload conditions caused by material jamming. Tests were conducted at frequencies of 30, 40, and 50 Hz with different shredding times. The results showed that increasing the VFD frequency produced smaller shredded particles. At 50 Hz, the shredded kangkung particles ranged from 1.56–2.00 cm, while spinach particles ranged from 1.91–2.21 cm. Under normal operating conditions, the motor current was 1.126 A at approximately 2,671 rpm, while under a locked-rotor condition, the current increased to 2.380 A and the TOR operated at approximately 37.24 seconds. Capacity testing resulted in 60 kg/h for a 1 kg sample processed for 60 seconds and an equivalent throughput of 120 kg/h for a 2 kg sample processed for 60 seconds. The auto-reverse system successfully restored motor rotation after material jamming, supporting the continuity of the shredding process. Based on the test results, the developed machine was capable of shredding vegetable waste while providing adjustable rotational speed and an automatic PLC-based protection system.
Authors
- Mahendra Widyartono (ORCID: https://orcid.org/0000-0002-4349-2995)
- Reza Rahmadian (ORCID: https://orcid.org/0000-0002-1417-3426)
- Daeng Rahmatullah
- Imam’Ubaidillah H
Institutions
- Universitas Negeri Surabaya (ID)
Publication Details
- Journal
- Jurnal Sains, Teknik, Ekonomi, dan Pendidikan
- Published
- 2026-11-20
- DOI
- https://doi.org/10.70134/satedik.v3i1.2412
- Primary Topic
- Industrial Automation and Control Systems
- Type
- article
- Field-Weighted Citation Impact
- 0.00