Magnetically recoverable rGO/Fe₃O₄–chitosan composite for competitive adsorption of dyes and heavy metals from water
Industrial wastewater can contain dyes and toxic metal ions simultaneously, making treatment more demanding because different contaminants compete for adsorption sites. A magnetically recoverable reduced graphene oxide (rGO)/Fe₃O₄–chitosan composite was synthesized and evaluated for methylene blue (MB), Congo red (CR), Pb²⁺, Cu²⁺, and Cd²⁺ removal. The composite was characterized by XRD, FTIR, Raman spectroscopy, SEM–EDS, BET, VSM, and zeta-potential analysis. BET analysis gave a surface area of 218.4 m² g⁻¹, a total pore volume of 0.529 cm³ g⁻¹, and a BJH average pore diameter of 9.7 nm. The reported single-component Langmuir capacities were 215.4, 182.6, 72.8, 58.4, and 52.6 mg g⁻¹ for MB, CR, Pb²⁺, Cu²⁺, and Cd²⁺, respectively. Mixed-pollutant capacities were lower by 14.0–31.9%, demonstrating competitive effects. Magnetic separation exceeded 95%, and 78.5–83.0% of initial capacity was retained after six regeneration cycles. The results indicate potential for mixed-contaminant treatment, although validation in real wastewater and continuous-flow systems remains necessary.
Authors
- Sahil Yousuf (ORCID: https://orcid.org/0009-0009-6462-7404)
Institutions
- National Institute of Technology Srinagar (IN)
Publication Details
- Published
- 2026-11-20
- DOI
- https://doi.org/10.61577/jnd.2026.100003
- Primary Topic
- Adsorption and biosorption for pollutant removal
- Type
- article
- Field-Weighted Citation Impact
- 0.00