Design and Analysis of Triangle Patch Microstrip Antenna Array For 5G Applications
This paper presents the design and analysis of a triangular patch microstrip antenna array intended for fifthgeneration (5G) wireless communication applications.The design specifications in the approved project report target an operating frequency of 8 GHz in the 5G millimeter-wave bands n257/n261.The proposed structure uses an equilateral triangular radiating patch on Rogers RT/duroid 5880 substrate and a 1×4 linear array with a corporate feed network.The report specifies a relative permittivity of 2.2, substrate thickness of 0.508 mm, copper thickness of 0.035 mm and a 50 fi input.The supplied simulation figures include S-parameter, VSWR, gain, three-dimensional radiation and surface-current plots.Their frequency axes and labels indicate approximately 3.5-6 GHz and about 4.75 GHz, respectively, and are not treated as verified 28 GHz simulation results.In addition, photographs of the fabricated antenna connected to a Vector Network Analyzer (VNA) and the measured S11 display are included.The VNA photograph shows a marker reading of 29.2275 GHz and -10.01 dB; this is reported as the displayed marker reading, not as a confirmed resonant frequency or complete bandwidth measurement.
Authors
- Akash L.S.
- J.S. Jerfin Sam
- Ananya H.A
- Divya R
- Girish V. Attimarad
Publication Details
- Journal
- IJARCCE
- Published
- 2026-11-20
- DOI
- https://doi.org/10.17148/ijarcce.2026.1511167
- Primary Topic
- Antenna Design and Analysis
- Type
- article
- Field-Weighted Citation Impact
- 0.00