Hardware-aware SRP-assisted aerial edge computing for low-latency mining IoT under cognitive spectrum sharing
The rapid growth of the Industrial Internet of Things (IIoT) in hazardous and topologically constrained environments, such as deep-pit mining, requires low-latency, reliable, and spectrum-aware communication and computing infrastructures. In such environments, terrestrial networks often suffer from severe non-line-of-sight (NLoS) blockage, while spectrum reuse with legacy primary systems imposes cognitive coexistence constraints. This paper proposes a simulation-driven optimization framework that integrates an aerial edge machine (AEM) with a smart reflecting panel (SRP) to support autonomous mining robots. Unlike ideal reflecting-surface models that assume lossless unit-modulus phase shifting, the proposed framework adopts a hardware-constrained SRP model whose phase-dependent amplitude response is fitted to measured varactor-tuned element data, and optimizes the reflection coefficients directly on the resulting non-convex manifold. We formulate a worst-case safety-response-time minimization problem by jointly optimizing quasi-static AEM placement, SRP passive beamforming, uplink transmit-power allocation, AEM computation-frequency allocation, and task-partitioning ratios under statistical interference-temperature-limit (ITL) constraints. The problem is solved by a two-level decomposition in which an outer bisection searches the target latency and an inner block coordinate descent (BCD) loop combines closed-form task and computation updates, primal-dual weighted MMSE power allocation, Riemannian manifold optimization (RMO), and a trust-region successive convex approximation (SCA) for placement. Each surrogate step is accepted only if it does not increase a common violation function, so the monotonicity of the inner loop holds by construction; no global optimality is claimed, and the returned latency is achieved by an explicitly verified feasible configuration that upper-bounds the optimum. At a workload of 3.0 Mbits the framework attains 1.05 s against 6.00 s for local execution, an $$82.5\%$$ reduction, while maintaining Jain’s fairness index above 0.9 and a fading-averaged cognitive safety headroom of 2.5–12.5 dB below the ITL threshold. The achieved latency lies within 0.05 s of the ideal-reflection bound; the analysis attributes this narrow gap not to near-optimal beamforming but to the deployment being edge-computation-limited, with uplink transmission accounting for roughly $$5.5\%$$ of the offloading time, so that the panel’s practical role is insurance against blockage rather than latency reduction. These results delimit the conditions under which hardware-aware and cognition-aware SRP-assisted aerial edge computing benefits mining digital ecosystems and industrial digital-twin deployments.
Authors
- Abed Saif Alghawli (ORCID: https://orcid.org/0000-0002-6586-2141)
- Asma A. Alhashmi (ORCID: https://orcid.org/0000-0001-7871-7069)
- Omar Alghushairy (ORCID: https://orcid.org/0000-0002-7378-5545)
- Mohammed I. Thanoon (ORCID: https://orcid.org/0000-0001-5780-9749)
- Khalid Almalki
- Sami F. Karali (ORCID: https://orcid.org/0000-0001-5799-1376)
- Abdulbasit A. Darem
- Raed Alsini
Institutions
- Northern Border University (SA)
- Saudi Electronic University (SA)
- Prince Sattam Bin Abdulaziz University (SA)
- King Abdulaziz University (SA)
- Umm al-Qura University (SA)
- University of Jeddah (SA)
- Al-Qalam University for Humanities and Applied Sciences (YE)
Publication Details
- Journal
- Scientific Reports
- Published
- 2026-11-20
- DOI
- https://doi.org/10.1038/s41598-026-77200-6
- Primary Topic
- IoT and Edge/Fog Computing
- Type
- article
- Field-Weighted Citation Impact
- 0.00
Funders
- Prince Sattam bin Abdulaziz University
- Northern Borders University