A Monolithically 3D-Printed CSRR-Based Microwave Sensor with Integrated Sample Container for Characterization of Water–Ethanol Mixtures
This article presents a proof-of-concept monolithically 3D-printed microfluidic sensor based on a complementary split-ring resonator (CSRR) for in-sample complex permittivity characterization of liquid mixtures. Fabricated using a piezoelectric additive manufacturing electronics (AME) process, the device integrates the resonator and microfluidic open sample container within a single dielectric substrate, eliminating hybrid assembly steps and enhancing electromagnetic field–liquid interaction. Tested with water–ethanol mixtures (50–100% water volume fraction), the sensor exploits resonance perturbation for quantitative dielectric sensing. The unloaded sensor resonates at 2.205 GHz, while its resonance frequency shifts from 1.1687 to 1.0418 GHz across the investigated concentration range. The device exhibits a linear response (R2 = 0.9764), and achieves an effective sensitivity of −2.507 MHz/%, an average normalized sensitivity of 0.84%, a resolution of 1.06%, and a within-device repeatability of 0.24% RSD (mean) for a single printed device. This compact, cleanroom-free 3D-printed platform demonstrates the viability of AME-based fabrication for microfluidic and lab-on-chip dielectric sensing applications, highlighting its potential for low-volume parallel production.
Authors
- Guy Ayissi Eyebe (ORCID: https://orcid.org/0000-0002-0304-9120)
- Abdelhak Hamid Allah (ORCID: https://orcid.org/0000-0002-6025-1771)
- Frédéric Domingue (ORCID: https://orcid.org/0000-0002-1291-7727)
Institutions
- Université de Yaoundé I (CM)
- Université du Québec à Trois-Rivières (CA)
Publication Details
- Journal
- Sensors
- Published
- 2026-11-20
- DOI
- https://doi.org/10.3390/s26227335
- Primary Topic
- Microwave and Dielectric Measurement Techniques
- Type
- article
- Field-Weighted Citation Impact
- 0.00
Funders
- Natural Sciences and Engineering Research Council of Canada