Thermodynamic Analysis of a Two-Stage Selective Carbothermic Reduction Process for Deep-Sea Polymetallic Nodules: Part II. Ferromanganese–Silicide Alloy Production
The manganese-rich residue remaining after selective recovery of critical metals from deep-sea polymetallic nodules represents a potential resource for manganese-alloy production. This study presents a thermodynamic analysis of the second stage of a proposed two-stage selective carbothermic reduction process to recover manganese, iron and silicon as a ferromanganese–silicide alloy. Equilibrium calculations were performed using the Equilibrium Composition module of HSC Chemistry® 7.1. The effects of temperature, carbon addition, total pressure, gas atmosphere and residue composition on metal recoveries and alloy composition were evaluated. The results show that manganese reduction requires substantially stronger reducing conditions than those used for selective Cu, Ni and Co recovery, supporting the thermodynamic basis of the two-stage process. A well-defined operating window was identified for high manganese recovery and ferromanganese–silicide alloy formation. The predicted high-temperature reduction behaviour was consistent with published experimental studies, including comparable manganese recoveries and alloy manganese contents. The results demonstrate the potential to convert the Stage I manganese-rich residue into a valuable ferromanganese–silicide alloy, improving overall resource utilization.
Authors
- Omid Marzoughi (ORCID: https://orcid.org/0000-0001-6070-8068)
- Christopher Pickles
- Dulmini Hissalle
Institutions
- Queen's University (CA)
- Queens University (BD)
Publication Details
- Journal
- Research Square
- Published
- 2026-11-20
- DOI
- https://doi.org/10.21203/rs.3.rs-11292196/v1
- Primary Topic
- Metallurgical Processes and Thermodynamics
- Type
- preprint