Formulation of surrogates aimed at emulating the sooting propensity of wood-derived pyrolysis oils

Pyrolysis oils (POs) derived from lignocellulosic biomass exhibit highly complex compositions and significant water content, which complicate the characterization and modeling of their sooting behavior. In this work, a combined experimental and modeling approach is used to formulate chemical surrogates explicitly designed to emulate the sooting propensity of POs produced from spruce and maple wood. The sooting propensities of 26 oxygenates and nitrogen-containing compounds representative of the major chemical classes reported in wood-derived POs were quantified using smoke point (SP) measurements converted into unified index (UI) values. These measurements enabled a substantial extension and refinement of an existing UI group contribution model (GCM). The sooting contributions of 12 new fragments were notably determined, while those of 7 previously under-constrained structural groups were updated, leading to the GCM, now comprising 114 structural groups, properly predicting the UIs measured herein. The soot-suppressing effect of water in blends was also quantified through UI assessment, hence enabling its explicit and consistent treatment in a surrogate formulation. A mixed-integer nonlinear optimization constrained by the sooting propensity, elemental composition, fixed water content, and literature-based mass fraction distributions of the different classes of components comprised in wood-derived POs was then employed to formulate chemical surrogates mimicking the sooting propensity of each produced bio-oil. The proposed model fuels theoretically fit both the elemental composition and the UIs of the studied POs, hence representing a robust foundation for future experimental validation in combustion environments. Furthermore, and although additional thermophysical properties were not directly included in the optimization as they were out of the scope of the present work, it is noteworthy that the proposed surrogates still exhibit densities, molecular weights, and higher heating values reasonably consistent with those of their parent oils.

Authors

Publication Details

Journal
Fuel
Published
2026-11-20
DOI
https://doi.org/10.1016/j.fuel.2026.142080
Primary Topic
Advanced Combustion Engine Technologies
Type
article
Field-Weighted Citation Impact
0.00

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Formulation of surrogates aimed at emulating the sooting propensity of wood-derived pyrolysis oils

Jasmine Hertzog, Vincent Carré, R. Lemaire, Sébastien Menanteau et al.
1 links
Fuel
Advanced Combustion Engine Technologies
article

Formulation of surrogates aimed at emulating the sooting propensity of wood-derived pyrolysis oils

Jasmine Hertzog, Vincent Carré, R. Lemaire, Sébastien Menanteau, Brice Martial Kamdem, Carl Rainville
article en

Abstract

Pyrolysis oils (POs) derived from lignocellulosic biomass exhibit highly complex compositions and significant water content, which complicate the characterization and modeling of their sooting behavior. In this work, a combined experimental and modeling approach is used to formulate chemical surrogates explicitly designed to emulate the sooting propensity of POs produced from spruce and maple wood. The sooting propensities of 26 oxygenates and nitrogen-containing compounds representative of the major chemical classes reported in wood-derived POs were quantified using smoke point (SP) measurements converted into unified index (UI) values. These measurements enabled a substantial extension and refinement of an existing UI group contribution model (GCM). The sooting contributions of 12 new fragments were notably determined, while those of 7 previously under-constrained structural groups were updated, leading to the GCM, now comprising 114 structural groups, properly predicting the UIs measured herein. The soot-suppressing effect of water in blends was also quantified through UI assessment, hence enabling its explicit and consistent treatment in a surrogate formulation. A mixed-integer nonlinear optimization constrained by the sooting propensity, elemental composition, fixed water content, and literature-based mass fraction distributions of the different classes of components comprised in wood-derived POs was then employed to formulate chemical surrogates mimicking the sooting propensity of each produced bio-oil. The proposed model fuels theoretically fit both the elemental composition and the UIs of the studied POs, hence representing a robust foundation for future experimental validation in combustion environments. Furthermore, and although additional thermophysical properties were not directly included in the optimization as they were out of the scope of the present work, it is noteworthy that the proposed surrogates still exhibit densities, molecular weights, and higher heating values reasonably consistent with those of their parent oils.

FuelVol. 431
Natural Sciences and Engineering Research Council of Canada
Affordable and clean energy
Advanced Combustion Engine Technologies
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon