Balancing Proton Transport and Catalyst Utilization with Fluorinated Polybenzimidazole Binders in HT-PEM Fuel Cells
High-temperature proton exchange membrane fuel cells (HT-PEMFCs) have attracted attention for clean energy conversion applications. However, catalyst layers using conventional polytetrafluoroethylene (PTFE) binders often exhibit phosphoric acid (PA) loss, inefficient proton transport, and limited mass transfer due to the hydrophobic fluorocarbon structure of PTFE and the absence of PA-binding and proton-conducting sites. In this work, a series of fluorinated polybenzimidazole (F-PBIs) binders were synthesized via temperature-controlled polymerization with tunable fluorine-to-nitrogen (F/N) ratio. F-PBIs combine PA-interacting benzimidazole units with fluorinated segments, enabling modulation of PA affinity and catalyst-layer interfacial properties. The investigated binders exhibited differences in calculated PA binding energies, proton transport, and catalyst accessibility. Among the synthesized binders, F12PBI, with an F/N ratio of 3, exhibits a balanced PA affinity (−13.55 kcal mol–1), which is associated with a favorable balance between proton transport and ORR-related impedance. As a result, the F12PBI-based membrane electrode assembly (MEA) delivers a peak power density of 798 mW cm–2 at 160 °C under nonhumidified and zero-backpressure H2/O2 conditions, which is much higher than that of PTFE binder (603 mW cm–2). Electrochemical analyses indicate reduced proton transport and ORR-related impedances in the F12PBI-based MEA, which showed a voltage decay rate of 12 μV h–1 over 75 h and stable responses under dynamic current and start/stop conditions. These results provide insights into fluorinated PBI binder design for HT-PEMFC catalyst layers.
Authors
- Zhenyuan Hu
- Shenghan Li
- Yunfeng Zhang (ORCID: https://orcid.org/0000-0001-6928-1742)
- Yongqiang Chen
- Yu Ding
- Feng Wang
Institutions
- China University of Geosciences (CN)
- Hubei Engineering University (CN)
Publication Details
- Journal
- ACS Applied Polymer Materials
- Published
- 2026-11-20
- DOI
- https://doi.org/10.1021/acsapm.6c03731
- Primary Topic
- Fuel Cells and Related Materials
- Type
- article
- Field-Weighted Citation Impact
- 0.00
Funders
- National Natural Science Foundation of China
- China Postdoctoral Science Foundation
- Natural Science Foundation of Hubei Province
- National Key Research and Development Program of China