Loading-Mode Dependence of Topology and Functional Grading in TPMS Lattices

Additively manufactured triply periodic minimal surface (TPMS) lattices, particularly in their functionally graded (FG) form, offer strong potential for load-bearing biomedical applications due to their tunable mechanical properties and biomimetic architecture. However, their performance is predominantly evaluated under uniaxial compression, leaving their behaviour under more complex loading conditions involving shear and torsion poorly understood. In this work, we present a systematic investigation of the mechanical response of gyroid and primitive FG-TPMS lattices under compression, compression–shear, and torsional loading. Lattices with similar nominal global architectural porosities (approximately 47% for primitive and 45% for gyroid) were fabricated from Digital ABS Plus™ using PolyJet printing and characterised experimentally. The results revealed a strong loading-mode dependence of functional grading and topology. Under compression, grading enhanced stiffness in gyroid lattices but had limited influence on primitive lattices, which consistently exhibited higher compressive stiffness and yield load. Under compression–shear, stiffness and yield showed minimal sensitivity to grading. In contrast, torsional loading exhibited a pronounced dependence on grading, with substantial increases in stiffness and yield torque achieved by redistributing material towards the outer regions. While primitive lattices outperformed gyroid under compression, this advantage did not generalise to shear- or torsion-dominated conditions. These findings demonstrate the loading-mode dependence of radial grading and provide experimental evidence to guide the design of FG-TPMS lattices for specific loading conditions.

Authors

Institutions

Publication Details

Journal
Engineering Archive (engrXiv)
Published
2026-11-20
DOI
https://doi.org/10.31224/8861
Primary Topic
Cellular and Composite Structures
Type
preprint
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
preprint

Loading-Mode Dependence of Topology and Functional Grading in TPMS Lattices

Boyang Wan, Ali Entezari, Anson Wen Han Cheong, Chi Wu et al.
2 links
Engineering Archive (engrXiv)
Cellular and Composite Structures
preprint

Loading-Mode Dependence of Topology and Functional Grading in TPMS Lattices

Boyang Wan, Ali Entezari, Anson Wen Han Cheong, Chi Wu, Qing Li, Yuhao Zhang
preprint en

Abstract

Additively manufactured triply periodic minimal surface (TPMS) lattices, particularly in their functionally graded (FG) form, offer strong potential for load-bearing biomedical applications due to their tunable mechanical properties and biomimetic architecture. However, their performance is predominantly evaluated under uniaxial compression, leaving their behaviour under more complex loading conditions involving shear and torsion poorly understood. In this work, we present a systematic investigation of the mechanical response of gyroid and primitive FG-TPMS lattices under compression, compression–shear, and torsional loading. Lattices with similar nominal global architectural porosities (approximately 47% for primitive and 45% for gyroid) were fabricated from Digital ABS Plus™ using PolyJet printing and characterised experimentally. The results revealed a strong loading-mode dependence of functional grading and topology. Under compression, grading enhanced stiffness in gyroid lattices but had limited influence on primitive lattices, which consistently exhibited higher compressive stiffness and yield load. Under compression–shear, stiffness and yield showed minimal sensitivity to grading. In contrast, torsional loading exhibited a pronounced dependence on grading, with substantial increases in stiffness and yield torque achieved by redistributing material towards the outer regions. While primitive lattices outperformed gyroid under compression, this advantage did not generalise to shear- or torsion-dominated conditions. These findings demonstrate the loading-mode dependence of radial grading and provide experimental evidence to guide the design of FG-TPMS lattices for specific loading conditions.

Engineering Archive (engrXiv)
University of Technology Sydney (AU), The University of Sydney (AU), University of Newcastle Australia (AU)
Cellular and Composite Structures
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon