Numerical investigation of the impact of constitutive behavior on red blood cell deformation during AFM interaction
Precise assessment of nanoscale red blood cell (RBC) mechanics is essential to minimize damage during manipulation and imaging. Most AFM studies use a single constitutive model and single-tip loading, although RBC behavior is time-dependent, nonlinear, and may involve permanent deformation. In this study, AFM contact was simulated using four constitutive models: elastic, viscoelastic, plastic, and viscoplastic, under single-tip and dual-tip loading conditions. Accurate RBC geometry was obtained from experimental surface characterization. Results showed that dual-tip loading reduced maximum stress for the elastic, viscoelastic, and plastic models. In the elastic model, stress decreased from 0.174 to 0.151 kPa, while deformation changed slightly from 0.000402 to 0.000410 μm. The viscoplastic model produced the largest deformation, whereas the elastic model showed the smallest. These findings indicate that suitable constitutive modeling and multi-point loading can reduce stress concentration and help preserve RBC structural integrity.
Authors
- Mahboube Mehrabani (ORCID: https://orcid.org/0009-0009-4838-6153)
- Moharam Habibnejad Korayem (ORCID: https://orcid.org/0000-0002-1344-3797)
- Ahmad Reza Rahnavard Ronizi (ORCID: https://orcid.org/0009-0004-5233-1466)
Institutions
- Iran University of Science and Technology (IR)
Publication Details
- Journal
- Tribology - Materials Surfaces & Interfaces
- Published
- 2026-11-20
- DOI
- https://doi.org/10.1177/17515831261509261
- Primary Topic
- Force Microscopy Techniques and Applications
- Type
- article
- Field-Weighted Citation Impact
- 0.00